Abstract:Flexible ultrafine SiC fibers with superior high-temperature stability and excellent oxidation resistance are regarded as one of the most promising materials for high-temperature applications. However, excess oxygen and carbon in the ultrafine SiC fibers limit their thermal stability due to decomposition of the SiCxOy phase. In the present work, flexible ultrafine nearly stoichiometric polycrystalline SiC fibers were fabricated by combining the electrospinning technique and polymer-derived ceramic method. The ultrafine SiC fibers exhibited superior high-temperature stability and oxidation resistance. The retention rates of tensile strength were 90.0 %, 94.2 % and 86.4 % after heat treatment in argon at 1800 °C, 1900 °C and 2000 °C, respectively. TG results of the fibers showed little weight loss of only 1.52 % at 1900 °C in Ar and the weight gain of only 4.1 % up to 1500 °C in air. Such improved thermal stability was achieved through sintering at high temperature for elimination of excess oxygen and carbon with Al doped as the sintering aid to restrain the grain coarsening. The ultrafine SiC fibers still exhibited excellent flexibility without obvious damage when they were heated by the butane blowtorch flame of about 1100 °C in air. Furthermore, the infrared thermography illustrated that the ultrafine SiC fiber membrane also had good thermal insulation performance. The outstanding mechanical properties and thermal stability of ultrafine SiC fibers suggest their potential applications at the high temperature and harsh environment.

The Preparation and Properties of High Temperature Resistant Sic(Al) Fibers

Fabrication of SiC ultrafine fiber with low oxygen content by electrospinning, thermal curing and pyrolysis of cyano-polycarbosilane

SiC fibers with different diameters exhibiting excellent high-temperature resistance and oxidation resistance

Single-source-precursor synthesis and characterization of SiAlC(O) ceramics from a hyperbranched polyaluminocarbosilane

Flexible ultrafine nearly stoichiometric polycrystalline SiC fibers with excellent oxidation resistance and superior thermal stability up to 1900 °C

Synthesis of Polytitanocarbosilane and Preparation of Si–C–Ti–B Fibers

Flexible and thermally stable SiC fiber mats derived from electrospun boron-doped polyaluminocarbosilane precursors

SiAlC ceramics from a new polyaluminocarbosilane: Synthesis, structure and oxidation behaviors

Preparation of silicon-nitride ceramic fibers with hafnium compounds loaded on the surface and the high temperature properties

LIQUID POLYCARBOSILANE DERIVED AI-CONTAINING SiC CERAMIC PRECURSORS——POLYALUMINOCARBOSILANE

Preparation and high-temperature properties of skin–core structure SiC ceramic fibers

Elemental and structural evolution of polymer-derived SiC fibers fabricated via solution blend and iodine curing methods

Effect of long-time annealing at high temperature on the microstructure and mechanical properties of different types of SiC fibers

Preparation of SiC ceramic fiber from a photosensitive polycarbosilane

High-temperature resistance and thermal insulation performance of continuous SiMOC ceramic fibers fabricated by the modified sol-gel method combined with dry spinning

Boron-carbon doped Silicon Carbide Fibers: Preparation and Property

Preparation and ablation resistance of carbon fiber with yttrium silicate coating

Fabrication, microstructure, and properties of SiC/Al4SiC4 multiphase ceramics via an in-situ formed liquid phase sintering

Interfacial reactions between polymer derived SiC fiber and Ti 3Si(Al)C2

Structure and properties of fine diameter continuous SiC ceramic fiber reinforced Al matrix composites

In-situ synthesis and microstructural evolution of a SiC reinforced Al-50Si composite exhibiting exceptional thermal properties