Abstract:Polycarbosilane (PCS) serves as a crucial precursor for silicon carbide (SiC) fibers and ceramics. However, both of the precursor and the resulting SiC ceramics are carbon-rich, which is often viewed as detrimental to their relevant high-temperature properties. In this work, PCS is modified using nanosized Si particles to improve SiC grain growth and reduce carbon content in the resulting SiC ceramics, and the structural evolution during the polymer–ceramic conversion process has been meticulously investigated. The findings reveal that the incorporation of nano-Si into PCS raises its actual ceramic yield and accelerates the organic-inorganic conversion process. This is attributed to the formation of a more crosslinked structure at 200 °C–350 °C, resulting from the reaction between the Si–OH groups in nanosized Si and the Si–H and Si–CH3 groups in PCS. The carbothermic reaction between nano-Si and the free carbon starts at approximately 1200 °C at the periphery of nanosized Si particles, and is accomplished at around 1400 °C. This leads to the formation of large-sized reactive β-SiC. Simultaneously, PCS-derived β-SiC with smaller sizes is also formed at 1300 °C–1400 °C. At 1600 °C–1800 °C, the growth of the reactive and the derived β-SiC in nano-Si-modified PCS is both accelerated due to a substantial decrease in the free carbon content. Consequently, the grain size of β-SiC is much larger than that of unmodified PCS. Additionally, the residual amorphous free carbon transforms into nanocrystalline carbon at around 1400 °C and evolves into graphite carbon at 1600 °C–1800 °C, which exhibits a more ordered structure with larger size compared to that in unmodified PCS.

Preparation of SiC-C fiber by polycarbosilane synthesized by co-pyrolysis of PDMS and PVC

Preparation of SiC ceramic fiber from a photosensitive polycarbosilane

Synthesis of cyano-polycarbosilane and investigation of its pyrolysis process

Fabrication of SiC ultrafine fiber with low oxygen content by electrospinning, thermal curing and pyrolysis of cyano-polycarbosilane

Synthesis and characteristics of polycarbomethylsilane via a one-pot approach

Synthesis of Polytitanocarbosilane and Preparation of Si–C–Ti–B Fibers

Improving SiC grain growth and reducing carbon content in pyrolyzed polycarbosilane using nanosized Si particles

Influence of polycarbosilane composition on the properties of SiC/SiC composite fabricated by precursor infiltration and pyrolysis process

Flexible and thermally stable SiC fiber mats derived from electrospun boron-doped polyaluminocarbosilane precursors

Preparation and Properties of Porous SiC/SiC Composites

Effect of Impurities Control on the Crystallization and Densification of Polymer-Derived SiC Fibers

One-pot Synthesis and Characterization of Liquid Polycarbosilanes

Boron-carbon doped Silicon Carbide Fibers: Preparation and Property

LIQUID POLYCARBOSILANE DERIVED AI-CONTAINING SiC CERAMIC PRECURSORS——POLYALUMINOCARBOSILANE

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Fabrication and characterization of pyrolytic carbons from phenolic resin reinforced by SiC nanowires with chain-bead structures

Humidity-Controlled Preparation of Flexible Porous Carbon Fibers from Block Copolymers

Polycarbosilane as a modulator for reaction-bonded silicon carbide processing of GNPs/Si mixtures

Evaluation of Poly(methylsilane‐carbosilane) Synthesized from Methyl‐dichlorosilane and Chloromethyldichloromethylsilane As a Precursor for SiC

Preceramic Paper-Derived SiCf/SiCp Composites Obtained by Spark Plasma Sintering: Processing, Microstructure and Mechanical Properties

Elemental and structural evolution of polymer-derived SiC fibers fabricated via solution blend and iodine curing methods