Abstract:This study presents preparing and characterization of polyacrylonitrile (PAN) fibers containing various content of tetraethoxysilane (TEOS) incorporated via mutual spinning solution or emulsion using wet and mechanotropic spinning methods. It was shown that the presence of TEOS in dopes does not affect their rheological properties. The coagulation kinetics of complex PAN solution was investigated by optical methods on the solution drop. It was shown that during the interdiffusion process phase separation occurs and TEOS droplets form and move in the middle of the dope's drop. Mechanotropic spinning induces the TEOS droplets to move to the fiber periphery. The morphology and structure of the fibers obtained were investigated by scanning and transmission electron microscopy, as well as X-ray diffraction methods. It was shown that during fiber spinning stages the transformation of the TEOS drops into solid silica particles takes place as a result of hydrolytic polycondensation. This process can be characterized as the sol-gel synthesis. The formation of nano-sized (3-30 nm) silica particles proceeds without particles aggregation, but in a mode of the distribution gradient along the fiber cross-section leading to the accumulation of the silica particles either in the fiber center (wet spinning) or in the fiber periphery (mechanotropic spinning). The prepared composite fibers were carbonized and according to XRD analysis of carbon fibers, the clear peaks corresponding to SiC were observed. These findings indicate the useful role of TEOS as a precursor agent for both, silica in PAN fibers and silicon carbide in carbon fibers that has potential applications in some advanced materials with high thermal properties.

Ceramic Fibers From Polymer Precursor Containing Si-O-Ti Bonds .2. Synthesis Of Various Types Of Ceramic Fibers

Synthesis of Polytitanocarbosilane and Preparation of Si–C–Ti–B Fibers

Synthesis and characteristics of polycarbomethylsilane via a one-pot approach

PREPARATION IN SITU OF TiO2 SURFACE LAYERS ON SiO2 FIBERS BY PRECURSOR CONVERSION METHOD

Preparation of SiC ceramic fiber from a photosensitive polycarbosilane

Synthesis of cyano-polycarbosilane and investigation of its pyrolysis process

Interfacial Reactions Between Polymer Derived SiC Fiber and Ti<sub>3</sub>Si(Al)C<sub>2</sub>

Precursor Linear Self-Assembly Nonhydrolytic Sol-Gel Synthesis of Ba0.7Sr0.3TiO3 Ceramic Fibers

Effect of Impurities Control on the Crystallization and Densification of Polymer-Derived SiC Fibers

RESEARCH PROGRESS OF POLYMER DERIVED ENGINEERING CERAMICS

Flexible and thermally stable SiC fiber mats derived from electrospun boron-doped polyaluminocarbosilane precursors

Interfacial reactions between polymer derived SiC fiber and Ti 3Si(Al)C2

Titanium Dioxide Fibers Prepared by Sol–gel Process and Centrifugal Spinning

Superparamagnetic Silicon Carbonitride Ceramic Fibers Through In Situ Generation of Iron Silicide Nanoparticles During Pyrolysis of an Iron-Modified Polysilazane

Elemental and structural evolution of polymer-derived SiC fibers fabricated via solution blend and iodine curing methods

Facile synthesis of a carbon-rich SiAlCN precursor and investigation of its structural evolution during the polymer-ceramic conversion process

Fabrication of SiC ultrafine fiber with low oxygen content by electrospinning, thermal curing and pyrolysis of cyano-polycarbosilane

Boron-carbon doped Silicon Carbide Fibers: Preparation and Property

Polymethylsilane As A Precursor to High-Purity Silicon-Carbide

Polyacrylonitrile Fibers with a Gradient Silica Distribution as Precursors of Carbon-Silicon-Carbide Fibers

Synthesis, characterization and growth mechanism of SiC fibers