Dielectric properties of YSZ high-k thin films fabricated at low temperature by pulsed laser deposition

J. Zhu,Z.G. Liu
DOI: https://doi.org/10.1016/S0167-577X(03)00306-9
IF: 3
2003-01-01
Materials Letters
Abstract:Yttria-stabilized zirconia (YSZ) films were deposited on Pt-coated silicon substrates and directly on n-type Si substrates, respectively, by pulsed laser deposition (PLD) technique using a YSZ (5 mol% Y2O3-stabilized ZrO2) ceramic target. The YSZ films were deposited in 1.5×10−2 Pa O2 ambient at 300 °C and in situ post-annealed at 400 °C. X-ray diffraction (XRD) and differential thermal analysis measurements demonstrated that YSZ remained amorphous. The dielectric constant of amorphous YSZ was determined to be about 26.4 by measuring Pt/YSZ/Pt capacitor structure. The 6-nm-thick amorphous YSZ films with an equivalent oxide thickness (EOT) of 1.46 nm and a low leakage current of 7.58×10−5 A/cm2 at 1 V gate voltage exhibit good electrical properties. YSZ thin films fabricated at low temperature 300 °C have satisfactory dielectric properties and could be a candidate of high-k gate dielectrics.
What problem does this paper attempt to address?