Abstract:Yttria-stabilized zirconia (YSZ) thin films on polycrystalline substrates were grown by cold-wall aerosol-assisted metallorganic chemical vapor deposition (MOCVD) at the temperatures of 673-1233 K using metal beta-diketonate chelates as precursors. Thin uniform films with amorphous structure were obtained below 673 K; when the deposition temperature increases to 773-1023 K, YSZ films appear to be a mixture of cubic and monoclinic phases; single cubic YSZ phase can be obtained at deposition temperature above 1023 K. The Y/Zr atom ratio estimated from the corresponding X-ray photoelectron spectroscopy peaks is less than the feed ratio, which can be interpreted by different transfer resistance of Y and Zr intermediates diffusing to the substrate surface. The films obtained at 673-1023 K possess a layer structure originated from low mobility of the absorbed species. Along with the increase of the deposition temperature, the grains become mature and larger, and then unite with each other to form a continuous columnar film. Mass transport dominates the growth process within lower temperatures, and homogeneous reaction will interrupt the growth at increasingly high temperatures. Growth rate expression with respect to temperature, pressure, gas flow rate, and metal concentration of precursor solutions was deduced assuming deposition of mass-transport limited mechanism, which is consistent with the experimental results. (c) 2005 The Electrochemical Society. All rights reserved.

Deposition and Characterization of YSZ Thin Films by Aerosol-Assisted CVD

Fabrication and Characterization of Y2O3 Stabilized ZrO2 Films Deposited with Aerosol-Assisted MOCVD

Deposition of Y2O3 stabilized ZrO2 thin films from Zr(DPM)4 and Y(DPM)3 by aerosol-assisted MOCVD

Formation and Rate Processes of Y2o3 Stabilized Zro2 Thin Films from Zr(Dpm)(4) and Y(Dpm)(3) by Cold-Wall Aerosol-Assisted Mocvd

Formation and Rate Processes of Y[sub 2]o[sub 3] Stabilized ZrO[sub 2] Thin Films from Zr(DPM)[sub 4] and Y(DPM)[sub 3] by Cold-Wall Aerosol-Assisted MOCVD

Synthesis of YSZ film by solid single source PE-MOCVD method and characterization

YSZ Thin Films Prepared by a Novel Powder Coating Process on Porous NiO-YSZ Cermet

From zirconia to yttria: Sampling the YSZ phase diagram using sputter-deposited thin films

Zro2 and Ysz Thin-Films Synthesized by Microwave Plasma Cvd Process

Aerosol-assisted MOCVD Deposition of YDC Thin Films on (nio + YDC) Substrates

Preparation of Yttria stabilized Zirconia (YSZ) film by electrophoretic deposition (EPD) method

Structural and compositional characterization of yttria-stabilized zirconia: evidence of surface-stabilized, low-valence metal species

Insitu Fabrication Of Ybco/Ysz/Si Thin-Films By Laser Ablation

Dielectric properties of YSZ high-k thin films fabricated at low temperature by pulsed laser deposition

Yttria-stabilized zirconia: a suitable substrate for c-axis preferred Nd–Fe–B thin films fabricated by pulsed–laser deposition

Simple Preparation of Yttria‐Stabilized Zirconia Powders by Plasma Discharge Electrolysis in Nitrate Solution

Yttria-stabilized zirconia (8YSZ) synthesis in a supercritical CO 2 -assisted process: a parametric study for achieving cubic phase stability

Fabrication and Characterizations of Ysz Electrolyte Films for Sofc

Dense YSZ electrolyte films prepared by modified electrostatic powder coating

Preparation of epitaxial yttria-stabilized zirconia with non-quilibrium t' phase and ferroelastic domain by pulsed laser deposition

Pulsed Laser Deposition of Thin YBCO Films on Faceted YSZ Single Crystal Fibers