Abstract:In the absence of template and thermal stabilizer, novel mesoporous ZrO2 and Y2O3-stabilized ZrO2 (YSZ) spherical powders were synthesized via the improved spray reaction (SR) technique. The synthesized materials were characterized by thermo-gravimetry/differential thermal analysis (TG/DTA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and Nitrogen adsorption/desorption isotherm techniques. Results reveal that the microstructure of ZrO2 precursor significantly depends on the aging process, and the particle size, surface area and phase composition of prepared ZrO2-based materials significantly depend on the calcination temperature. For pure ZrO2 spherical particles, the size varies from 1.63μm, 1.58μm to 1.60μm in correspondent to the calcined temperature 700°C, 800°C and 1000°C, respectively. And also the major cubic ZrO2 (c-ZrO2) is formed when calcined at 700°C whereas the predominant monoclinic ZrO2 (m-ZrO2) is synthesized when calcined at 800–1000°C. For YSZ spherical particles, the size changes from 1.65μm, 1.59μm, 1.62μm to 1.45μm in correspondent to the calcined temperature 500°C, 600°C, 700°C and 1000°C, respectively. The synthesized YSZ spheres exhibit the similar phase constitution of predominant tetragonal ZrO2 (t-ZrO2) at all experimental temperatures but show the different surface area and pore diameter, ~14.72m2/g surface area and 10.7nm pore diameter at 500°C as well as ~34.39m2/g surface area and 8.3nm pore diameter at 600°C.

Simple Preparation of Yttria‐Stabilized Zirconia Powders by Plasma Discharge Electrolysis in Nitrate Solution

Fabrication and Characterization of Y2O3 Stabilized ZrO2 Films Deposited with Aerosol-Assisted MOCVD

Deposition of Y2O3 stabilized ZrO2 thin films from Zr(DPM)4 and Y(DPM)3 by aerosol-assisted MOCVD

Formation and Rate Processes of Y2o3 Stabilized Zro2 Thin Films from Zr(Dpm)(4) and Y(Dpm)(3) by Cold-Wall Aerosol-Assisted Mocvd

YSZ Thin Films Prepared by a Novel Powder Coating Process on Porous NiO-YSZ Cermet

Synthesis of YSZ film by solid single source PE-MOCVD method and characterization

Manufacture process of 8Y<sub>2</sub>O<sub>3</sub> stabilized ZrO<sub>2</sub> from nano powders

The Properties of YSZ Electrolyte Sintering at 1300 °C

Ethanol-induced formation of precursor for 8mol% Yttria-stabilized zirconia: Towards the production of well-dispersed, easily sintering, and high-conductivity nano-powders

Synthesis of yttria-stabilized zirconia powders for plasma spray by internal gelation

Research on Sintering Process of YSZ Electrolyte

The Propertied Of Ysz Electrolyte Sintering At 1300 Degrees Enc

Yttria-stabilized zirconia (8YSZ) synthesis in a supercritical CO 2 -assisted process: a parametric study for achieving cubic phase stability

Internal Nano Voids in Yttria-Stabilised Zirconia (YSZ) Powder

Preparation of Bi2O3-YSZ and YSB-YSZ Composite Powders by a Microemulsion Method and Their Performance as Electrolytes in a Solid Oxide Fuel Cell

Preparation of yttria-stabilized zirconia electrolyte via atmospheric plasma spraying for metal-supported solid oxide fuel cells

Controlled Synthesis of Bi2O3-YSZ Composite Powders and Their Sintering Behavior for High-Performance Electrolytes

Dense YSZ electrolyte films prepared by modified electrostatic powder coating

Nano-dispersed yttria-stabilized zirconia powder: Phase, morphology, and conductivity investigation with different chelating agents via a modified sol-gel method

Preparations and Characterizations of New Mesoporous ZrO2 and Y2O3-stabilized ZrO2 Spherical Powders

Fabrication and Characterizations of Ysz Electrolyte Films for Sofc