Abstract:In this paper, a Co60Fe20Y20 film was sputtered onto Si (100) substrates with thicknesses ranging from 10 to 50 nm under four conditions to investigate the structure, magnetic properties, and surface energy. Under four conditions, the crystal structure of the CoFeY films was found to be amorphous by an X-ray diffraction analyzer (XRD), suggesting that yttrium (Y) added into CoFe films and can be refined in grain size and insufficient annealing temperatures do not induce enough thermal driving force to support grain growth. The saturation magnetization (MS) and low-frequency alternate-current magnetic susceptibility (χac) increased with the increase of the thicknesses and annealing temperatures, indicating the thickness effect and Y can be refined grain size and improved ferromagnetic spin exchange coupling. The highest Ms and χac values of the Co60Fe20Y20 films were 883 emu/cm3 and 0.26 when the annealed temperature was 300 °C and the thickness was 50 nm. The optimal resonance frequency (fres) was 50 Hz with the maximum χac value, indicating it could be used at a low frequency range. Moreover, the surface energy increased with the increase of the thickness and annealing temperature. The maximum surface energy of the annealed 300 °C film was 30.02 mJ/mm2 at 50 nm. Based on the magnetic and surface energy results, the optimal thickness was 50 nm annealed at 300 °C, which has the highest Ms, χac, and a strong adhesion, which can be as a free or pinned layer that could be combined with the magnetic tunneling layer and applied in magnetic fields.

Yttria-stabilized zirconia: a suitable substrate for c-axis preferred Nd–Fe–B thin films fabricated by pulsed–laser deposition

Fabrication and Characterization of Y2O3 Stabilized ZrO2 Films Deposited with Aerosol-Assisted MOCVD

Deposition of Y2O3 stabilized ZrO2 thin films from Zr(DPM)4 and Y(DPM)3 by aerosol-assisted MOCVD

Formation and Rate Processes of Y2o3 Stabilized Zro2 Thin Films from Zr(Dpm)(4) and Y(Dpm)(3) by Cold-Wall Aerosol-Assisted Mocvd

Formation and Rate Processes of Y[sub 2]o[sub 3] Stabilized ZrO[sub 2] Thin Films from Zr(DPM)[sub 4] and Y(DPM)[sub 3] by Cold-Wall Aerosol-Assisted MOCVD

Synthesis of YSZ film by solid single source PE-MOCVD method and characterization

Epitaxial growth of YSZ buffer layer for YBa2Cu3O7-δ coated conductor by reel to reel pulsed laser deposition

Improvement of Surface Morphology of Yttrium-Stabilized Zirconia Films Deposited by Pulsed Laser Deposition on Rolling Assisted Biaxially Textured Substrate Tapes

Preparation of epitaxial yttria-stabilized zirconia with non-quilibrium t' phase and ferroelastic domain by pulsed laser deposition

Insitu Fabrication Of Ybco/Ysz/Si Thin-Films By Laser Ablation

Texture and Morphology Developments of Yttria-stabilized Zirconia (YSZ) Buffer Layer for Coated Conductors by RF Sputtering

Deposition and Characterization of YSZ Thin Films by Aerosol-Assisted CVD

Effect of Yttrium Addition on Structure and Magnetic Properties of Co60Fe20Y20 Thin Films

The influences of rapid growth of yttria-stabilized ZrO_2 buffer layers for YBCO coated conductors

From zirconia to yttria: Sampling the YSZ phase diagram using sputter-deposited thin films

Epitaxial Growth of YBa2Cu3O7−x Thin Films on Si(100) with Zirconia Buffers of Varying Crystalline Quality and Structure

Preparation of (001)-oriented PZT thick films on silicon wafer by pulsed laser deposition

Ferroelastic deformation mechanism and mechanical properties of [001]-oriented YSZ film by indentation

Optical And Structural Characteristics Of Nd : Yvo4 Film On Sio2/Si Substrate Fabricated By Pulsed Laser Deposition

Pulsed Laser Deposition of Thin YBCO Films on Faceted YSZ Single Crystal Fibers

In-Plane Aligned Ybco Tape On Textured Ysz Buffer Layer Deposited On Nicr Alloy Substrate By Laser Ablation With Only O+ Ion Beam Assistance