Abstract:The decreasing feature sizes in complementary metal-oxide semiconductor (CMOS) transistor technology will require the replacement of SiO2 with gate dielectrics that have a high dielectric constant (high-k) because as the SiO2 gate thickness is reduced below 1.4 nm, electron tunnelling effects and high leakage currents occur in SiO2, which present serious obstacles to future device reliability. In recent years significant progress has been made on the screening and selection of high-k gate dielectrics, understanding their physical properties, and their integration into CMOS technology. Now the family of hafnium oxide-based materials has emerged as the leading candidate for high-k gate dielectrics due to their excellent physical properties. It is also realized that the high-k oxides must be implemented in conjunction with metal gate electrodes to get sufficient potential for CMOS continue scaling. In the advanced nanoscale Si-based CMOS devices, the composition and thickness of interfacial layers in the gate stacks determine the critical performance of devices. Therefore, detailed atomicscale understandings of the microstructures and interfacial structures built in the advanced CMOS gate stacks, are highly required. In this paper, several high-resolution electron, ion, and photon-based techniques currently used to characterize the high-k gate dielectrics and interfaces at atomic-scale, are reviewed. Particularly, we critically review the research progress on the characterization of interface behavior and structural evolution in the high-k gate dielectrics by high-resolution transmission electron microscopy (HRTEM) and the related techniques based on scanning transmission electron microscopy (STEM), including high-angle annular darkfield (HAADF) imaging (also known as Z-contrast imaging), electron energy-loss spectroscopy (EELS), and energy dispersive X-ray spectroscopy (EDS), due to that HRTEM and STEM have become essential metrology tools for characterizing the dielectric gate stacks in the present and future generations of CMOS devices. In Section 1 of this review, the working principles of each technique are briefly introduced and their key features are outlined. In Section 2, microstructural characterizations of high-k gate dielectrics at atomic-scale by electron microscopy are critically reviewed by citing some recent results reported on high-k gate dielectrics. In Section 3, metal gate electrodes and the interfacial structures between high-k dielectrics and metal gates are discussed. The electron beam damage effects in high-k gate stacks are also evaluated, and their origins and prevention are described in Section 4. Finally, we end this review with personal perspectives towards the future challenges of atomic-scale material characterization in advanced CMOS gate stacks.

An Improved Pregate Cleaning Process for High-k Gate Dielectric Fabrication

Preparation of High-Quality Gate Dielectrics for Ge MOSFET's in Wet Ambients

Modulation of Interfacial and Electrical Properties of Hfgdo/Gaas Gate Stacks by Ammonium Sulfide Passivation and Rapid Thermal Annealing

Interface Optimization and Band Alignments of HfTiO/InGaAs Gate Stacks by Metalorganic Chemical Vapor Deposition of AlON Passivation Layer

Improved thermal stability and electrical properties of atomic layer deposited HfO2/AlN high-k gate dielectric stacks on GaAs

Chemical Oxide Interfacial Layer for the High-$k$-Last/Gate-Last Integration Scheme

Improving Low-Frequency Noise in 14-Nm FinFET by Optimized High-k/Metal Gate Thermal Processing

Fabrication of Self-aligned Enhancement-mode n-channel GaAs MOSFETs Employing a Wet Clean Process for GaAs Substrates

A study of post-etch wet clean on electrical and reliability performance of Cu/low k interconnections

High Quality Ultrathin Gate Dielectrics Prepared by In-Situ RTP

Influence of Surface Treatment Prior to ALD High-/Spl Kappa/ Dielectrics on the Performance of SiGe Surface-Channel Pmosfets

A New Silane-Ammonia Surface Passivation Technology For Realizing Inversion-Type Surface-Channel Gaas N-Mosfet With 160 Nm Gate Length And High-Quality Metal-Gate/High-K Dielectric Stack

(Invited) ALD High-k As a Common Gate Stack Solution for Nanoelectronics

Study on Ultra-Thin Gate Dielectrics: Surface Preparation and Reliability

Atomic Layer Deposition (ALD) of Metal Gates for CMOS

Post Etch Residue Removal and Material Compatibility in BEOL Using Formulated Chemistries

Atomic layer deposition of high-quality HFO2 film on graphene using low energy electron beam pretreatment

Spectroscopic and Electrical Properties of Atomic Layer Deposition Al2O3 Gate Dielectric on Surface Pretreated Si Substrate

Reliability Improvement of 28-nm High- /Metal Gate-Last MOSFET Using Appropriate Oxygen Annealing

Improved Electrical and Reliability Characteristics of HfN--HfO/sub 2/-Gated Nmosfet with 0.95-Nm EOT Fabricated Using a Gate-First Process

Challenges in Atomic-Scale Characterization of High-k Dielectrics and Metal Gate Electrodes for Advanced CMOS Gate Stacks