Abstract:Slurry reactors have recently received more attention because of their advantages in caloric transfer. At present, the synthesis of dimethyl ether (DME) and methanol in slurry reactors is considered to be promising. The catalysts currently used in slurry reactors are all prepared by dispersing the traditional solid catalysts into an organic medium, which easily leads to the medium viscosity increase, defluidization decrease, and activity drop. This work suggests a novel method of preparing slurry catalysts for slurry reactors. Its main innovative thought lies in the direct preparation of catalysts from a solution to the slurry. Firstly, a catalyst precursor with a three-dimensional net structure is prepared. Then the precursor is modified by solvent substitution or heterogeneous azeotropic distillation and treated by N-2. After the treatment, a slurry catalyst is obtained. In this paper, two CuO/ZrO2 slurry catalysts were prepared by this new method and characterized by X-ray diffraction, N-2 adsorption, and temperature-programmed reduction. The catalysts were evaluated in CO hydrogenation in a slurry reactor. The results show that the slurry catalysts have a phase structure similar to that of the catalyst prepared by the traditional method. The CuO/ZrO2 slurry catalyst modified by heterogeneous azeotropic distillation is highly dispersed. Using this CuO/ZrO2 slurry catalyst can directly synthesize DME from CO hydrogenation without adding any methanol dehydration component, and the highest DME selectivity reaches 92.10%. The slurry catalyst is stable during the reaction for fifteen days, and no significant deactivation occurs.

Catalytic performance of CuZnAl slurry catalyst prepared by complete liquid phase technology for direct synthesis DME from syngas

The Structure Properties of CuZnAl Slurry Catalysts Prepared by a Complete Liquid-Phase Method and its Catalytic Performance for DME Synthesis from Syngas

Complete liquid-phase preparation and characterization of Cu-Zn-Al-Zr slurry catalysts for synthesis of dimethyl ether

Liquid-phase preparation of catalysts used in slurry reactors to synthesize dimethyl ether from syngas: Effect of heat-treatment atmosphere

Effect of Si Content on the Performance of Direct Synthesis of Dimethyl Ether over Slurry CuZnAl Catalyst Prepared by Complete Liquid Phase Technology

Complete Liquid Phase Preparation and Characterization of CuZnAlSi Catalysts for DME Synthesis in Slurry Reactor

Liquid-Phase Preparation of Dme Slurry Catalysts Using Pseudo-Boehmite As Aluminum Source

Research on Si–Al Based Catalysts Prepared by Complete Liquid-Phase Method for DME Synthesis in a Slurry Reactor

Single-step dimethyl ether synthesis on a Cu/ZnO/Al_2O_3/ZrO_2+γ-Al_2O_3 bifunctional catalyst in slurry reactor

Effect of Composition of Raw Materials on Structure and Dimethyl Ether Synthesis Activity of Cu-Zn-Al Catalyst Prepared by Complete Liquid Phase Method

Kinetic Study of Complete Liquid-Phase Catalyst for Dimethyl Ether Synthesis

Xps Study on Cuznal Catalysts Prepared by Different Methods for Direct Synthesis of Dimethyl Ether

Effect of Surfactant on Structure and Performance of Catalysts for DME Synthesis in Slurry Bed

C2–C4 Hydrocarbons Synthesis from Syngas over CuO–ZnO–Al2O3/SAPO‐34 Bifunctional Catalyst

Liquid-phase preparation of CuO/ZrO2 catalyst used in slurry reactors and its catalytic activity for CO hydrogenation

Influence of Acidic and Alkaline Silica Sols on the Performance of Cu/Zn/Al Slurry Catalysts

A novel liquid-phase technology for the preparation of slurry catalysts

Optimizing CO 2 Hydrogenation to DME through Tailored Interfacial Interactions: Weakening Synergy in CuZnZr and Al-Modified SBA-15 Catalysts

Transformation of Syngas to Light Hydrocarbons over Bifunctional CuO–ZnO/SAPO-34 Catalysts: the Effect of Preparation Methods

Global Kinetics of Direct Synthesis of Dimethyl Ether from Syngas in Slurry Reactor over Cu-Zn-Al-Zr Catalyst

Catalysis for One-step Synthesis of Dimethyl Ether from Hydrogenation of CO