Abstract:The direct synthesis of light olefins from syngas via Fischer-Tropsch synthesis reaction is a promising technology for direct synthesis of olefins from syngas. The key is to improve the selectivity of light olefins through the regulation of product distribution. In this work, the hydrophobic Fe@Si catalyst was prepared by room temperature solid state methodStober-silylation method, and then the catalyst was combined with SAPO-34 molecular sieves with different contents to prepare Fe@Si/S-34 composite catalysts. The effects of SAPO-34 molecular sieve content on the physicochemical properties of the catalysts were investigated by X-ray diffraction, scanning electron microscopy, N-2 adsorption-desorption, NH3 temperature programmed desorption and water contact angle measurement. The results showed that the content of SAPO-34 molecular sieve has significant influence on the surface area, pore volume, acidity and hydrophobicity of the catalysts. With the increase of SAPO-34 molecular sieve content, the specific surface area and total pore volume of the catalyst increased, the weak acid and medium-strong acid sites increased, and the hydrophobicity weakened. The catalytic performance evaluation results showed that the Fe@Si/S-34 composite catalyst decomposed C5+ hydrocarbons into light hydrocarbons, significantly reduced the selectivity of C5+ products and increased the selectivity of C2 similar to C4 hydrocarbons. Appropriate SAPO-34 molecular sieve could significantly improve the selectivity of C2 similar to C-4 olefins. When the mass ratio of Fe@Si catalyst to SAPO-34 is 2, the C-2 similar to C-4 olefin selectivity of Fe@Si/S-34 catalyst is the highest, the conversion of CO is 80.0%, the selectivity of CO2 in the product is 8.9%, and the selectivity of C-2 similar to C-4 olefins is 31.1%. In this study, the hydrophobicity of Fe@Si catalyst and the cracking activity of SAPO-34 molecular sieve for C5+ hydrocarbon were coupled together to inhibit the water-gas shift (WGS) reaction, reduce the CO2 selectivity and obtain higher C-2 similar to C-4 olefin selectivity, which provided a new strategy for the development of catalysts for Fischer-Tropsch synthesis to olefins.

C2–C4 Hydrocarbons Synthesis from Syngas over CuO–ZnO–Al2O3/SAPO‐34 Bifunctional Catalyst

Preparation of Fe@Si/S-34 Catalysts and Its Catalytic Performance for Syngas to Olefins

Synthesis of Composition-Tunable Syngas from Efficiently Electrochemical Conversion of CO2 over AuCu/CNT Bimetallic Catalyst

Transformation of Syngas to Light Hydrocarbons over Bifunctional CuO–ZnO/SAPO-34 Catalysts: the Effect of Preparation Methods

Bifunctional Catalysts Composed of Low Silicon‐content SAPO‐34 Nanosheets and in 2 O 3 /zro 2 with Improved Performance for CO 2 Hydrogenation

Catalytic conversion of syngas to light hydrocarbons via simulated intermediates CO/CO2/DME/N2/H2 over the regulated acidity of SAPO-34

Direct Conversion Of Syngas Into Hydrocarbons Over A Core-Shell Cr-Zn@Sio2@Sapo-34 Catalyst

Synthesis Of Higher Alcohol Mixtures From Syngas Over Modified Copper Catalysts

Synthesis of CuO–ZnO–Al2O3 @ SAPO-34 Core@shell Structured Catalyst by Intermediate Layer Method

Optimization of Conditions for Preparation of ZSM-5@silicalite-1 Core–shell Catalysts Via Hydrothermal Synthesis

Hydrogenation of СО2 into Hydrocarbons on Bifunctional Catalysts

Synthesis of hierarchical SAPO-34 to improve the catalytic performance of bifunctional catalysts for syngas-to-olefins reactions

Tio2-Ceo2 Mixed Oxide Catalysts For Iso-C4 Hydrocarbon Synthesis From Syngas

Direct Conversion of Syngas-to-Hydrocarbons over Higher Alcohols Synthesis Catalysts Mixed with HZSM-5

Effects of CO2 on synthesis of isobutene and isobutane from CO2/CO/H2 reactant mixtures over zirconia-based catalysts

Influence of the ZnCrAl Oxide Composition on the Formation of Hydrocarbons from Syngas

Bifunctional Catalysts with Versatile Zeolites Enable Unprecedented Para-Xylene Productivity for Syngas Conversion under Mild Conditions

Highly Active Catalytic CO2 Hydrogenation to Lower Olefins via Spinel ZnGaOx Combined with SAPO-34

Direct Transformation of Syngas to Aromatics over Na-Zn-Fe5C2 and Hierarchical HZSM-5 Tandem Catalysts

Synthesis of Aromatics from Syngas over FeMnK/SiO2 and HZSM-5 Tandem Catalysts

Efficient conversion of benzene and syngas to toluene and xylene over ZnO-ZrO2&H-ZSM-5 bifunctional catalysts