Abstract:Electrochemical conversion of CO2 to the syngas hybrid with the Fischer–Tropsch (FT) process is a promising way to produce synthetic fuels from renewable energy sources. The product distribution in liquid hydrocarbons produced by FT synthesis has strong dependence on the CO/H2 ratio of the syngas feedstock. Herein, we demonstrated the feasibility of tuning the CO/H2 ratio at a wide range by developing nanoparticle-assisted Ni–Co binary single-atom catalysts for electrocatalytic production of syngas. By controlling the elemental proportion of Ni–Co in the composite catalysts, electrochemical reduction of CO2 to syngas with a tunable CO/H2 ratio from 0.3 to 27.6 was achieved. For the binary catalysts with a Ni–Co ratio of 1:1, the CO/H2 ratio maintains at 1.3–1.5 in a broad potential range from −0.59 to −0.83 V versus reversible hydrogen electrode (RHE) and the total current density reaches ∼32.2 mA/cm2 at −1.0 V versus RHE. The promotion effect of nanoparticles on Ni–Co single-atom catalysts was validated by partial removal of nanoparticles and further density functional theory (DFT) calculations. As revealed by DFT calculations, nanoparticles incorporated in single-atom sites take essential roles in facilitating the adsorption of CO2 and the formation of *COOH. The origin of CO2RR and hydrogen evolution reaction reactivities can be identified as Ni–N4 and Co–N4 single-atom sites, respectively. The dual active sites allow the facile control of the CO/H2 ratio of electrochemical converted syngas, and it will be beneficial to downstream production of diverse chemicals.

Synthesis of Composition-Tunable Syngas from Efficiently Electrochemical Conversion of CO2 over AuCu/CNT Bimetallic Catalyst

Tuning Sb Atoms on Cu‐Based Catalysts for Electrochemical Conversion of CO2 to Syngas

Selectively Converting Carbon Dioxide to Syngas over Intermetallic AuCu Catalysts

Synthesis of Tunable Syngas on Cobalt‐Based Catalysts Towards Carbon Dioxide Reduction

A Co3O4-CDots-C3N4 three component electrocatalyst design concept for efficient and tunable CO2 reduction to syngas

Theoretically Designed Cu10Sn3‐Cu‐SnOx as Three‐Component Electrocatalyst for Efficient and Tunable CO2 Reduction to Syngas

Electrochemical Conversion of CO2 to Syngas with Controllable CO/H2 Ratios over Co and Ni Single-Atom Catalysts.

Electrochemical Conversion of CO<sub>2</sub> to Syngas with Controllable CO/H<sub>2</sub> Ratios over Co and Ni Single-Atom Catalysts

Selectivity control for CO2 electroreduction to syngas using Fe/CuOx catalysts with high current density

Nanoparticle-Assisted Ni–Co Binary Single-Atom Catalysts Supported on Carbon Nanotubes for Efficient Electroreduction of CO 2 to Syngas with Controllable CO/H 2 Ratios

Tunable Cu–M bimetal catalysts enable syngas electrosynthesis from carbon dioxide

Tuning Single Atom-Nanoparticle Ratios of Ni-based Catalysts for Synthesis Gas Production from CO2

Electrochemical conversion of CO2 to syngas over Cu-M (M = Cd, Zn, Ni, Ag, and Pd) bimetal catalysts

Electrochemical Conversion of CO <sub>2</sub> to Syngas with Controllable CO/H <sub>2</sub> Ratios over Co and Ni Single‐Atom Catalysts

In Situ Exsolved CuZn Alloy Electrocatalysts for CO2 Conversion to Tunable Syngas Production

Synthesis of MOF-Derived Hybrids for Efficient Electrocatalytic Reduction of CO2 to Syngas

Electrochemical conversion of CO2 to syngas with a wide range of CO/H2 ratio over Ni/Fe binary single-atom catalysts

Synthesis of 2H/fcc-Heterophase AuCu Nanostructures for Highly Efficient Electrochemical CO2 Reduction at Industrial Current Densities

Direct Low Concentration CO2 Electroreduction to Multicarbon Products Via Rate-Determining Step Tuning

Coupled Metal/Oxide Catalysts with Tunable Product Selectivity for Electrocatalytic CO2 Reduction

0D/1D Heterostructure for Efficient Electrocatalytic CO2-to-C1 Conversion by Ultra-Small Cluster-Based Multi-Metallic Sulfide Nanoparticles and MWCNTs