Abstract:The direct synthesis of light olefins from syngas via Fischer-Tropsch synthesis reaction is a promising technology for direct synthesis of olefins from syngas. The key is to improve the selectivity of light olefins through the regulation of product distribution. In this work, the hydrophobic Fe@Si catalyst was prepared by room temperature solid state methodStober-silylation method, and then the catalyst was combined with SAPO-34 molecular sieves with different contents to prepare Fe@Si/S-34 composite catalysts. The effects of SAPO-34 molecular sieve content on the physicochemical properties of the catalysts were investigated by X-ray diffraction, scanning electron microscopy, N-2 adsorption-desorption, NH3 temperature programmed desorption and water contact angle measurement. The results showed that the content of SAPO-34 molecular sieve has significant influence on the surface area, pore volume, acidity and hydrophobicity of the catalysts. With the increase of SAPO-34 molecular sieve content, the specific surface area and total pore volume of the catalyst increased, the weak acid and medium-strong acid sites increased, and the hydrophobicity weakened. The catalytic performance evaluation results showed that the Fe@Si/S-34 composite catalyst decomposed C5+ hydrocarbons into light hydrocarbons, significantly reduced the selectivity of C5+ products and increased the selectivity of C2 similar to C4 hydrocarbons. Appropriate SAPO-34 molecular sieve could significantly improve the selectivity of C2 similar to C-4 olefins. When the mass ratio of Fe@Si catalyst to SAPO-34 is 2, the C-2 similar to C-4 olefin selectivity of Fe@Si/S-34 catalyst is the highest, the conversion of CO is 80.0%, the selectivity of CO2 in the product is 8.9%, and the selectivity of C-2 similar to C-4 olefins is 31.1%. In this study, the hydrophobicity of Fe@Si catalyst and the cracking activity of SAPO-34 molecular sieve for C5+ hydrocarbon were coupled together to inhibit the water-gas shift (WGS) reaction, reduce the CO2 selectivity and obtain higher C-2 similar to C-4 olefin selectivity, which provided a new strategy for the development of catalysts for Fischer-Tropsch synthesis to olefins.

Catalytic conversion of syngas to light hydrocarbons via simulated intermediates CO/CO2/DME/N2/H2 over the regulated acidity of SAPO-34

Preparation of Fe@Si/S-34 Catalysts and Its Catalytic Performance for Syngas to Olefins

Bifunctional Catalysts Composed of Low Silicon‐content SAPO‐34 Nanosheets and in 2 O 3 /zro 2 with Improved Performance for CO 2 Hydrogenation

C2–C4 Hydrocarbons Synthesis from Syngas over CuO–ZnO–Al2O3/SAPO‐34 Bifunctional Catalyst

Transformation of Syngas to Light Hydrocarbons over Bifunctional CuO–ZnO/SAPO-34 Catalysts: the Effect of Preparation Methods

Impact of Zn/Cr Ratio on ZnCrOx-SAPO-34 Bifunctional Catalyst for Direct Conversion of Syngas to Light Olefins

Direct Conversion Of Syngas Into Hydrocarbons Over A Core-Shell Cr-Zn@Sio2@Sapo-34 Catalyst

Direct Conversion of Syngas into Light Olefins over Zirconium‐Doped Indium(III) Oxide and SAPO‐34 Bifunctional Catalysts: Design of Oxide Component and Construction of Reaction Network

High Conversion of Syngas to Ethene and Propene on Bifunctional Catalysts via the Tailoring of SAPO Zeolite Structure

Role of Nanosized Sheet-Like SAPO-34 in Bifunctional Catalyst for Syngas-to-olefins Reaction

Role of SAPO-18 Acidity in Direct Syngas Conversion to Light Olefins

Syngas to Light Olefin Synthesis over La Doped ZnxAlyOz Composite and SAPO-34 Hybrid Catalysts

GamCrOx/H-SAPO-34(F), a highly efficient bifunctional catalyst for the direct conversion of CO2 into ethene and propene

Syngas to light olefins conversion with high olefin/paraffin ratio using ZnCrO x /AlPO-18 bifunctional catalysts

Carbon Dioxide Hydrogenation to Light Olefins over ZnO-Y2O3 and SAPO-34 Bifunctional Catalysts

UiO-n-membrane Regulate Bifunctional Catalysts GaZrOx/SAPO-34@UiO-n Improving CO2 Conversion to Light Olefins

Utilization Of Sapo-18 Or Sapo-35 In The Bifunctional Catalyst For The Direct Conversion Of Syngas To Light Olefins

Simultaneously Achieving High Conversion and Selectivity in Syngas-to-Propane Reaction via a Dual-Bed Catalyst System

Highly effective conversion of CO2 into light olefins abundant in ethene

Compound Catalyst of ReMoSx@HSSZ-39 and SAPO-34 Zeolites for High Performance Conversion of CO2 to C2-4 Hydrocarbons

Tuning CO2 Hydrogenation to Light Olefin Selectivity via Cu/Zn/Zr Supported on Modified SAPO‐34