Optimization of Conditions for Preparation of ZSM-5@silicalite-1 Core–shell Catalysts Via Hydrothermal Synthesis

Chuang Liu,Yihua Long,Zhengbao Wang
DOI: https://doi.org/10.1016/j.cjche.2018.03.030
IF: 3.8
2018-01-01
Chinese Journal of Chemical Engineering
Abstract:Although the preparation of ZSM-5@silicalite-1 (ZS) core-shell catalysts has been reported in the literature, their selectivity to pars-xylene (PX) in the toluene alkylation with methanol is difficult to control. Here we present the effects of water and ZSM-5 adding amounts in the synthesis solution, the hydrothermal synthesis time, and the Si/Al ratio of core ZSM-5 on the catalytic performance of ZS core-shell catalysts. The ZS core-shell catalysts were characterized by X-ray diffraction (XRD), N-2 adsorption, and NH3 temperature-programmed desorption (NH3-TPD) techniques. The highest PX selectivity of 95.5% was obtained for the ZS (Si/Al = 140) catalyst prepared in the synthesis solution with a molar ratio of 0.2TPAOH:1TEOS:250H(2)O at 175 degrees C and 10 r.min(-1) for only 2 h and the corresponding toluene conversion is as high as 22.8% for the alkylation of toluene with methanol. (C) 2018 The Chemical Industry and Engineering Society of China, and Chemical Industry Press. All rights reserved.
What problem does this paper attempt to address?