Abstract:The direct synthesis of light olefins from syngas via Fischer-Tropsch synthesis reaction is a promising technology for direct synthesis of olefins from syngas. The key is to improve the selectivity of light olefins through the regulation of product distribution. In this work, the hydrophobic Fe@Si catalyst was prepared by room temperature solid state methodStober-silylation method, and then the catalyst was combined with SAPO-34 molecular sieves with different contents to prepare Fe@Si/S-34 composite catalysts. The effects of SAPO-34 molecular sieve content on the physicochemical properties of the catalysts were investigated by X-ray diffraction, scanning electron microscopy, N-2 adsorption-desorption, NH3 temperature programmed desorption and water contact angle measurement. The results showed that the content of SAPO-34 molecular sieve has significant influence on the surface area, pore volume, acidity and hydrophobicity of the catalysts. With the increase of SAPO-34 molecular sieve content, the specific surface area and total pore volume of the catalyst increased, the weak acid and medium-strong acid sites increased, and the hydrophobicity weakened. The catalytic performance evaluation results showed that the Fe@Si/S-34 composite catalyst decomposed C5+ hydrocarbons into light hydrocarbons, significantly reduced the selectivity of C5+ products and increased the selectivity of C2 similar to C4 hydrocarbons. Appropriate SAPO-34 molecular sieve could significantly improve the selectivity of C2 similar to C-4 olefins. When the mass ratio of Fe@Si catalyst to SAPO-34 is 2, the C-2 similar to C-4 olefin selectivity of Fe@Si/S-34 catalyst is the highest, the conversion of CO is 80.0%, the selectivity of CO2 in the product is 8.9%, and the selectivity of C-2 similar to C-4 olefins is 31.1%. In this study, the hydrophobicity of Fe@Si catalyst and the cracking activity of SAPO-34 molecular sieve for C5+ hydrocarbon were coupled together to inhibit the water-gas shift (WGS) reaction, reduce the CO2 selectivity and obtain higher C-2 similar to C-4 olefin selectivity, which provided a new strategy for the development of catalysts for Fischer-Tropsch synthesis to olefins.

Synthesis of Aromatics from Syngas over FeMnK/SiO2 and HZSM-5 Tandem Catalysts

Direct Transformation of Syngas to Aromatics over Na-Zn-Fe5C2 and Hierarchical HZSM-5 Tandem Catalysts

Preparation of Fe@Si/S-34 Catalysts and Its Catalytic Performance for Syngas to Olefins

High Selectivity to Aromatics by a Mg and Na Co-modified Catalyst in Direct Conversion of Syngas

Controlled reduction of spinel material for highly selective syngas aromatization over bifunctional catalysts

Direct hydrogenation of CO 2 into valuable aromatics over K/Fe-Cu-Al @HZSM-5 tandem catalysts: Effects of zeolite surface acidity on aromatics formation

Two-way Desorption Coupling to Enhance Syngas to Aromatics by MnO/H-ZSM-5

C2–C4 Hydrocarbons Synthesis from Syngas over CuO–ZnO–Al2O3/SAPO‐34 Bifunctional Catalyst

Bifunctional Catalysts with Versatile Zeolites Enable Unprecedented Para-Xylene Productivity for Syngas Conversion under Mild Conditions

Surface Self-Cleaning Effect of Bifunctional Catalyst to Boost the High Yield Production of Aromatics Directly from Syngas

Selective Conversion of Syngas to Aromatics over Metal Oxide/hzsm-5 Catalyst by Matching the Activity Between CO Hydrogenation and Aromatization

Effect of Iron Loading on Acidity and Performance of Fe/HZSM-5 Catalyst for Direct Synthesis of Aromatics from Syngas

Surface Si decoration of ultrafine NaFeMn-Si catalyst enabling high Fe-phase electron density for effectively converting syngas to aromatics

Enhanced Aromatic Selectivity by the Sheet-Like ZSM-5 in Syngas Conversion

High‐Efficiency and Long‐life Synergetic Dual‐Oxide/Zeolite Catalyst for Direct Conversion of Syngas into Aromatics

Highly selective synthesis of light aromatics from CO2 by chromium-doped ZrO2 aerogels in tandem with HZSM-5@SiO2 catalyst

Harnessing the Synergistic Interplay of Fischer‐Tropsch Synthesis (Fe‐Co) Bimetallic Oxides in Na‐FeMnCo/HZSM‐5 Composite Catalyst for Syngas Conversion to Aromatic Hydrocarbons

Direct conversion of syngas into light aromatics over Cu-promoted ZSM-5 with ceria–zirconia solid solution

Selective conversion of CO2 and H2 into aromatics

Ceria-Zirconia/Zeolite Bifunctional Catalyst for Highly Selective Conversion of Syngas into Aromatics

Insights into the Key Factor of Zeolite Morphology on the Selective Conversion of Syngas to Light Aromatics over a Cr2O3/ZSM-5 Catalyst