Abstract:Slurry reactors have recently received more attention because of their advantages in caloric transfer. At present, the synthesis of dimethyl ether (DME) and methanol in slurry reactors is considered to be promising. The catalysts currently used in slurry reactors are all prepared by dispersing the traditional solid catalysts into an organic medium, which easily leads to the medium viscosity increase, defluidization decrease, and activity drop. This work suggests a novel method of preparing slurry catalysts for slurry reactors. Its main innovative thought lies in the direct preparation of catalysts from a solution to the slurry. Firstly, a catalyst precursor with a three-dimensional net structure is prepared. Then the precursor is modified by solvent substitution or heterogeneous azeotropic distillation and treated by N-2. After the treatment, a slurry catalyst is obtained. In this paper, two CuO/ZrO2 slurry catalysts were prepared by this new method and characterized by X-ray diffraction, N-2 adsorption, and temperature-programmed reduction. The catalysts were evaluated in CO hydrogenation in a slurry reactor. The results show that the slurry catalysts have a phase structure similar to that of the catalyst prepared by the traditional method. The CuO/ZrO2 slurry catalyst modified by heterogeneous azeotropic distillation is highly dispersed. Using this CuO/ZrO2 slurry catalyst can directly synthesize DME from CO hydrogenation without adding any methanol dehydration component, and the highest DME selectivity reaches 92.10%. The slurry catalyst is stable during the reaction for fifteen days, and no significant deactivation occurs.

Liquid-phase preparation of CuO/ZrO2 catalyst used in slurry reactors and its catalytic activity for CO hydrogenation

CO2 Hydrogenation to Methanol over Cu/ZnO Catalysts Synthesized Via a Facile Solid-Phase Grinding Process Using Oxalic Acid

A novel liquid-phase technology for the preparation of slurry catalysts

Complete liquid-phase preparation and characterization of Cu-Zn-Al-Zr slurry catalysts for synthesis of dimethyl ether

Complete Liquid Phase Preparation and Characterization of CuZnAlSi Catalysts for DME Synthesis in Slurry Reactor

The Structure Properties of CuZnAl Slurry Catalysts Prepared by a Complete Liquid-Phase Method and its Catalytic Performance for DME Synthesis from Syngas

Liquid-phase preparation of catalysts used in slurry reactors to synthesize dimethyl ether from syngas: Effect of heat-treatment atmosphere

Surface Properties of CuO/ZnO/Al_2O_3 Catalyst for Methanol Synthesis in Slurry Reactor

CO 2 Hydrogenation to Methanol in a Slurry Reactor: Catalytic Performance of CuO-Enhanced In 2 O 3 /ZrO 2

Single-step dimethyl ether synthesis on a Cu/ZnO/Al_2O_3/ZrO_2+γ-Al_2O_3 bifunctional catalyst in slurry reactor

Catalytic performance of CuZnAl slurry catalyst prepared by complete liquid phase technology for direct synthesis DME from syngas

Effect of Surfactant on Structure and Performance of Catalysts for DME Synthesis in Slurry Bed

Preparation of Cu/ZnO/Al2O3 Catalysts in a Solvent-Free Routine for CO Hydrogenation

Synthesis, characterization and activity pattern of Cu–ZnO/ZrO2 catalysts in the hydrogenation of carbon dioxide to methanol

A High Activity Cu/ZnO/Al2O3 Catalyst for Methanol Synthesis: Preparation and Catalytic Properties

Liquid-Phase Preparation of Dme Slurry Catalysts Using Pseudo-Boehmite As Aluminum Source

Core-shell structured CuO-ZnO@H-ZSM-5 catalysts for CO hydrogenation to dimethyl ether

Preparation of Highly Dispersed Cu Catalysts from Hydrotalcite Precursor for the Dehydrogenation of 1,4-Butanediol

Production of hydrogen by steam reforming of methanol over Cu/ZnO catalysts prepared via a practical soft reactive grinding route based on dry oxalate-precursor synthesis

A practical approach for the preparation of high activity Cu/ZnO/ZrO2 catalyst for methanol synthesis from CO2 hydrogenation

Inverse ZrO2/Cu as a highly efficient methanol synthesis catalyst from CO2 hydrogenation