Abstract:Slurry reactors have recently received more attention because of their advantages in caloric transfer. At present, the synthesis of dimethyl ether (DME) and methanol in slurry reactors is considered to be promising. The catalysts currently used in slurry reactors are all prepared by dispersing the traditional solid catalysts into an organic medium, which easily leads to the medium viscosity increase, defluidization decrease, and activity drop. This work suggests a novel method of preparing slurry catalysts for slurry reactors. Its main innovative thought lies in the direct preparation of catalysts from a solution to the slurry. Firstly, a catalyst precursor with a three-dimensional net structure is prepared. Then the precursor is modified by solvent substitution or heterogeneous azeotropic distillation and treated by N-2. After the treatment, a slurry catalyst is obtained. In this paper, two CuO/ZrO2 slurry catalysts were prepared by this new method and characterized by X-ray diffraction, N-2 adsorption, and temperature-programmed reduction. The catalysts were evaluated in CO hydrogenation in a slurry reactor. The results show that the slurry catalysts have a phase structure similar to that of the catalyst prepared by the traditional method. The CuO/ZrO2 slurry catalyst modified by heterogeneous azeotropic distillation is highly dispersed. Using this CuO/ZrO2 slurry catalyst can directly synthesize DME from CO hydrogenation without adding any methanol dehydration component, and the highest DME selectivity reaches 92.10%. The slurry catalyst is stable during the reaction for fifteen days, and no significant deactivation occurs.

A novel liquid-phase technology for the preparation of slurry catalysts

Liquid-phase preparation of CuO/ZrO2 catalyst used in slurry reactors and its catalytic activity for CO hydrogenation

Research on the Design and Application of Efficient Catalysts Based on Interfacial Chemistry: Molecular Catalysts in Gas-Liquid Mixed Systems

The Structure Properties of CuZnAl Slurry Catalysts Prepared by a Complete Liquid-Phase Method and its Catalytic Performance for DME Synthesis from Syngas

Complete liquid-phase preparation and characterization of Cu-Zn-Al-Zr slurry catalysts for synthesis of dimethyl ether

Catalytic performance of CuZnAl slurry catalyst prepared by complete liquid phase technology for direct synthesis DME from syngas

Complete Liquid Phase Preparation and Characterization of CuZnAlSi Catalysts for DME Synthesis in Slurry Reactor

CO2 Hydrogenation to Methanol over Cu/ZnO Catalysts Synthesized Via a Facile Solid-Phase Grinding Process Using Oxalic Acid

Liquid-Phase Preparation of Dme Slurry Catalysts Using Pseudo-Boehmite As Aluminum Source

Liquid-phase preparation of catalysts used in slurry reactors to synthesize dimethyl ether from syngas: Effect of heat-treatment atmosphere

Facile and Flexible Preparation of Highly Active CuCe Monolithic Catalysts for VOCs Combustion

Influence of the precursors in CuZnAl slurry catalyst preparation by the complete liquid phase for the ethanol synthesis from syngas

Single-step dimethyl ether synthesis on a Cu/ZnO/Al_2O_3/ZrO_2+γ-Al_2O_3 bifunctional catalyst in slurry reactor

Research on Si–Al Based Catalysts Prepared by Complete Liquid-Phase Method for DME Synthesis in a Slurry Reactor

Surface Properties of CuO/ZnO/Al_2O_3 Catalyst for Methanol Synthesis in Slurry Reactor

Transformation of Syngas to Light Hydrocarbons over Bifunctional CuO–ZnO/SAPO-34 Catalysts: the Effect of Preparation Methods

Synthesis, characterization and evaluation of Cu/MgAlFe as novel transfer catalyst for SOx removal

Effect of Surfactant on Structure and Performance of Catalysts for DME Synthesis in Slurry Bed

A High Activity Cu/ZnO/Al2O3 Catalyst for Methanol Synthesis: Preparation and Catalytic Properties

Preparation of CuO/ZnO/Al2O3 Catalysts for Methanol Synthesis Using Parallel-Slurry-mixing Method

Kinetic Study of Complete Liquid-Phase Catalyst for Dimethyl Ether Synthesis