CO 2 Hydrogenation to Methanol in a Slurry Reactor: Catalytic Performance of CuO-Enhanced In 2 O 3 /ZrO 2

Jingyuan Guan,Arav Saherwala,Varshiga Vijayakumar,Dominic Pjontek
DOI: https://doi.org/10.1021/acs.iecr.3c03647
2024-01-22
Industrial & Engineering Chemistry Research
Abstract:Converting CO2 to value-added fuels and chemical commodities is crucial for the chemical industry and the limitation of global warming. Methanol, a high-production volume chemical, can be synthesized via direct CO2 hydrogenation; however, this conversion faces challenges in thermodynamic limitations and requires stable catalysts with high methanol selectivity and CO2 conversion. Gas–liquid–solid slurry reactors have the advantage of removing the exothermic heat of CO2 hydrogenation and potentially improving methanol synthesis. In this work, the catalytic performance of In2O3 and CuO at various loadings supported on ZrO2 are compared in the slurry reactor for methanol formation through direct CO2 hydrogenation. The 5 wt % CuO/ZrO2 catalyst showed a higher conversion of 24% but a lower methanol selectivity of 29% when compared to the 5 wt % In2O3/ZrO2 with a conversion of 14% and a selectivity of 42%. CuO was thus added to enhance the In2O3/ZrO2 catalyst, which increased the CO2 conversion to 20% with a methanol selectivity of 38%, thus obtaining a promising methanol activity of 0.17 gMeOH gcat –1 h–1. Influences of the reaction temperature, reaction pressure, H2:CO2 gas ratio, and stirring speed on methanol formation are also reported. The highest methanol activity of 0.28 gMeOH gcat –1 h–1 was reached by the proposed 5 wt % In2O3-5 wt % CuO/ZrO2 catalysts at 280 °C and 8.5 MPa.
engineering, chemical
What problem does this paper attempt to address?