Abstract:Liquid feed Passive Direct Methanol Fuel Cell (DMFC) is a promising option for charging low power application devices. In passive DMFC, Nafion membranes provide high proton conductivity, chemical, and thermal stability. However, the DMFC suffers from the disadvantage that the Nafion membrane allows the flow of methanol fuel from the anode side to cathode side (methanol crossover), and leads to mixed overpotential losses. In the present study, liquid electrolyte (LE) layer is introduced between two Nafion membranes to reduce the methanol crossover and to improve the performance of the passive DMFC. The LE layer consists of piled hydrophilic filter papers, which are soaked in diluted sulfuric acid solution. Three different LE layers of thickness 1.5 mm, 2 mm and 2.5 mm are considered. The fuel cell performance is studied by varying the methanol concentration also. Experimental studies are carried out to find out the best thickness of the LE layer, which gives better fuel cell performance for different methanol concentrations. The fuel cell performance is evaluated in terms of peak power density and maximum current density. Optimum LE layer thickness of 2 mm, which gives better passive DMFC performance for different methanol concentration ranges is identified. The corresponding peak power density and maximum current density are 3.872 mW cm−2 and 33.6 mAcm−2, which are around 30.71% and 13.51% greater than the corresponding conventional-DMFC values, respectively.

Effect of Methanol Concentration on Performance of Passive DMFC

The Effect of Methanol Concentration on the Performance of A Passive Dmfc

Numerical simulation on mass transport in a passive vapor-fed direct methanol fuel cell operating with neat methanol

A High-Performance Direct Methanol Fuel Cell Technology Enabled by Mediating High-Concentration Methanol Through a Graphene Aerogel

Methanol Concentration Control Strategies for Direct Methanol Fuel Cells

A Neat Methanol Fed Passive DMFC with a New Anode Structure

Experimental investigations on the effect of current collector open ratio on the performance of a passive direct methanol fuel cell with liquid electrolyte layer

Optimization of Membrane Electrode Assembly in Air-Breathing Direct Methanol Fuel Cell

Influence of Current Collector Design and Combination on the Performance of Passive Direct Methanol Fuel Cells

Influence of intermediate liquid electrolyte layer on the performance of passive direct methanol fuel cell

Effect of flow characteristics and temperature on performance and efficiency of a direct methanol fuel cell stack

A Methanol Fuel Processing System with Methanol Steam Reforming and CO Selective Methanation Modules for PEMFC Application

Novel Anode Electrode Structure with a Fuel Management Layer for High-Concentration Passive Direct Methanol Fuel Cells

Effect of the Microporous Layer Structure and Hydrophobicity on the Performance of Direct Methanol Fuel Cells

Performance analysis and multi-optimization of direct methanol fuel cell based on a novel numerical model considering mass transfer

Performance of a Direct Methanol Fuel Cell

Improvement of Direct Methanol Fuel Cell Performance by Modifying Catalyst Coated Membrane Structure

A Liquid–Vapor Two-Phase Model of Direct Methanol Fuel Cells With Platinum Group Metal-Free Cathode Catalyst

Critical materials and technology in direct methanol fuel cells

Power Generation Experiment of Direct Methanol Fuel Cell

Improve methanol efficiency for direct methanol fuel cell system via investigation and control of optimal operating methanol concentration