Abstract:Summary Microporous layer (MPL) has been proven to significantly improve water management in proton exchange membrane fuel cells (PEMFC). However, its effects on fuel cell durability have not been fully revealed. In this contribution, the effects of MPL on the degradation of PEM fuel cells are investigated. Two single fuel cells, with and without MPL at the cathode, are assembled. The aging test is conducted and the cell performance is periodically characterized under various operating conditions. The experimental results show that the presence of MPL can effectively mitigate the degradation of PEMFC. The electrochemical impedance analysis at low current (150 mA cm−2) shows the fuel cell with MPL has a smaller increase in charge transfer resistance during aging test, indicating MPL can mitigate kinetic degradation. The scanning electron microscope (SEM) images show less thickness reduction in aged catalyst layer of the fuel cell with MPL, indicating MPL can protect the catalyst layer from carbon corrosion and micro‐structure damage. Besides, the effect of MPL on mass transport loss is analysed, and the results show that MPL can alleviate the increase in mass transport loss during aging test. Under either wet (air relative humidity of 75% and 100%) or very low air flow rate conditions, the presence of MPL unambiguously improves the water transport for the fresh cell. Most importantly, the superior water management capability of MPL is sustained after the harsh aging test, reducing mass transfer resistance.

Effect of the Microporous Layer Structure and Hydrophobicity on the Performance of Direct Methanol Fuel Cells

Polypyrrole nanowires as a cathode microporous layer for direct methanol fuel cell to enhance oxygen transport

The function of microporous layers and the interaction between the anode and cathode in DMFCs. Part I: The double roles of microporous layers in DMFCs

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

The microporous layer in proton exchange membrane fuel cells, from transport mechanism to structural design

High-Performance Proton Exchange Membrane Fuel Cells Enabled by Highly Hydrophobic Hierarchical Microporous Carbon Layers Grafted with Silane

Novel Anode Electrode Structure with a Fuel Management Layer for High-Concentration Passive Direct Methanol Fuel Cells

Improvement of Direct Methanol Fuel Cell Performance by Modifying Catalyst Coated Membrane Structure

Rational design of carbon network structure in microporous layer toward enhanced mass transport of proton exchange membrane fuel cell

Effects Of The Nanoimprint Pattern On The Performance Of A Mems-Based Micro Direct Methanol Fuel Cell

Gradient Hydrophobic Microporous Layer for High-Performance Proton-Exchange Membrane Fuel Cells

A Liquid–Vapor Two-Phase Model of Direct Methanol Fuel Cells With Platinum Group Metal-Free Cathode Catalyst

Critical materials and technology in direct methanol fuel cells

Design and Fabrication of a Polymer-Based Micro Direct Methanol Fuel Cell

Silane-functionalized Carbon with Super-Hydrophobicity Advancing Microporous Layer for Proton Exchange Membrane Fuel Cells

Durability improvement mechanism of proton exchange membrane fuel cell by microporous layer

Performance of Polymer Electrolyte Fuel Cell under Wet/dry Conditions with Hydrophilic and Hydrophobic Electrospun Microporous Layers

Improved DMFC water management via superwetting, high-performance catalyst synthesized by nanocapsule method

An exploration of the solution of direct methanol fuel cell cost effectiveness

A hybrid cathode catalytic layer composed of M–N–C and Pt/C for direct methanol fuel cells with high methanol tolerance

Optimization of Membrane Electrode Assembly in Air-Breathing Direct Methanol Fuel Cell