Abstract:Direct methanol fuel cells (DMFCs) offer a promising power source by utilizing liquid-state methanol as fuel, providing easy storage and transportability. Currently, DMFCs commonly employ perfluorosulfonic acid membranes, such as the well-known Nafion membrane, as proton exchange membranes. However, perfluorosulfonic acid membranes have significant drawbacks in DMFCs, including a high crossover rate, substantial swelling, poor thermal stability, and elevated costs. The crossover of methanol fuel to the cathode side is particularly detrimental as it can poison the precious Pt catalyst, leading to damage in the fuel cell system. In this manuscript, we propose a non-ionic proton exchange membrane based on the polycarbonate track etched (PCTE) membrane. The aligned nanopores in pristine PCTE, with a regular diameter, facilitate proton passage while mitigating the crossover of methanol molecules. This results in satisfactory proton conductivity and selectivity comparable to that of the commercial Gore membrane. By adding a layer of graphene treated with oxygen plasma for 10 seconds, methanol permeation can be reduced by 16.44%, while achieving a 42.11% increase in proton conductivity compared to the commercial Gore membrane. Furthermore, PCTE material offers a more cost-effective alternative to Gore membrane, with a 18.37% lower swelling ratio and significantly higher stability. These characteristics make PCTE a promising choice for DMFCs, offering potential improvements in performance and cost-effectiveness.

Polypyrrole nanowires as a cathode microporous layer for direct methanol fuel cell to enhance oxygen transport

Effect of the Microporous Layer Structure and Hydrophobicity on the Performance of Direct Methanol Fuel Cells

Reticulated polyaniline nanowires as a cathode microporous layer for high-temperature PEMFCs

Enhanced Water Management Via the Optimization of Cathode Microporous Layer Using 3D Graphene Frameworks for Direct Methanol Fuel Cell

Effects of Anode Microporous Layers Made of Carbon Powder and Nanotubes on Water Transport in Direct Methanol Fuel Cells

A high-performance direct methanol fuel cell with a polymer fiber membrane and RuO2/CNTs as a cathode catalyst

Titanate-Grafted Carbon Black-Facilitated MPLs for Advanced Proton Exchange Membrane Fuel Cells

High-Performance Polymer Fiber Membrane Based Direct Methanol Fuel Cell System with Non-Platinum Catalysts

Electrospun Fabrication and Experimental Characterization of Highly Porous Microporous Layers for PEM Fuel Cells

An alkaline direct methanol fuel cell with a polymer fiber membrane and MnO2-catalyzed cathode

Rational design of carbon network structure in microporous layer toward enhanced mass transport of proton exchange membrane fuel cell

Mesoporous 3D Nitrogen-Doped Yolk-Shelled Carbon Spheres for Direct Methanol Fuel Cells with Polymer Fiber Membranes

Silane-functionalized Carbon with Super-Hydrophobicity Advancing Microporous Layer for Proton Exchange Membrane Fuel Cells

Pt-Co Supported On Polypyrrole-Multiwalled Carbon Nanotubes As An Anode Catalyst For Direct Methanol Fuel Cells

A Direct Methanol Fuel Cell Without the Use of a Polymer Electrolyte Membrane or Precious Metal Cathode Catalyst

Using Woven Carbon Fiber Fabric to Construct Gradient Porous Structure for Passive Direct Methanol Fuel Cells

Superhydrophobic Carbon Functionalized by Chemical Grafting of Fluoroalkylsilane Enables an Efficient Microporous Layer for Proton-Exchange Membrane Fuel Cells

Novel Anode Electrode Structure with a Fuel Management Layer for High-Concentration Passive Direct Methanol Fuel Cells

Anodic diffusion layer with graphene-carbon nanotubes composite material for passive direct methanol fuel cell

High-Performance Proton Exchange Membrane Fuel Cells Enabled by Highly Hydrophobic Hierarchical Microporous Carbon Layers Grafted with Silane

Evaluation and Optimization of Polycarbonate Track-Etched (PCTE) Membranes for Direct Methanol Fuel Cells.