Abstract:Fuel cells on polybenzimidazole (PBI) membrane belong to high-temperature polymer-electrolyte membrane fuel cells (HT-PEMFC). When a polymer-electrolyte complex of PBI with o-phosphoric acid (PA) is applied as a proton-conducting membrane, the proton conductivity is provided without humidification above 120°C. Hydrogen-air HT-PEMFCs are able of operating effectively at 150–200°C, which allows application of technical hydrogen contaminated with CO as fuel. However, it should be noted that application of conventional "thin-film" Pt/C electrodes based on electrically conductive carbon black with Pt nanoparticles in aggressive PA environment results in electrochemical corrosion of carbon, which leads to the loss of Pt electrocatalyst particles and their aggregation (Ostwald ripening). Evidently, there is a need to replace the carbon black with more stable carbon nanostructured materials. It has been shown that self-supporting mats (essentially "felt") based on carbon nanofibers (CNF) can be used as HT-PEMFC anodes. The CNF mats were obtained in three stages. At the first stage, the nanofiber precursor material was obtained by electrospinning of solution of a copolymer of acrylonitrile with methyl acrylate (with addition of ZrCl 4 ). Then, the mats were stabilized by thermal oxidation (350°C, air). Afterwards, the CNFs were kept in Zn(NO 3 ) 2 (porogen) solution and pyrolyzed (1000 C, vacuum). To improve the proton conductivity, N-phosphonoethylated cardo poly(benzimidazole) (PBI-PhT-P) was deposited on the CNF surface which leads to an improvement in the performance characteristics of HT-PEMFC. The obtained materials were examined by electron microscopy. Their specific surface area and specific volume were investigated by the N 2 and CO 2 adsorption methods (up to 597 m 2 /g and 0.170 cm 3 /g). After Pt deposition, the CNFs were successfully tested as anodes (up to 0.4 mA/cm 2 at 625 mV) in hydrogen-air HT-PEMFC.

Reticulated polyaniline nanowires as a cathode microporous layer for high-temperature PEMFCs

Polypyrrole nanowires as a cathode microporous layer for direct methanol fuel cell to enhance oxygen transport

Development of Cathode Ordered Membrane Electrode Assembly Based on TiO2 Nanowire Array and Ultrasonic Spraying

Carbon-Nanowall Microporous Layers for Proton Exchange Membrane Fuel Cell

In Situ Flame-Synthesized Carbon Nanotubes on Carbon Paper as a Microporous Layer for Proton Exchange Membrane Fuel Cells

Aligned Polyaniline Nanorods in Situ Grown on Gas Diffusion Layer and Their Application in Polymer Electrolyte Membrane Fuel Cells

Nano-engineering of a 3D-ordered membrane electrode assembly with ultrathin Pt skin on open-walled PdCo nanotube arrays for fuel cells

Enhanced Catalytic Properties from Platinum Nanodots Covered Carbon Nanotubes for Proton-Exchange Membrane Fuel Cells

Nanostructured Ultrathin Catalyst Layer Based on Open-Walled Ptco Bimetallic Nanotube Arrays for Proton Exchange Membrane Fuel Cells

Proton-Conducting Polymer-Coated Carbon Nanofiber Mats for Pt-Anodes of High-Temperature Polymer-Electrolyte Membrane Fuel Cell

High-Performance Proton Exchange Membrane Fuel Cells Enabled by Highly Hydrophobic Hierarchical Microporous Carbon Layers Grafted with Silane

Carbon Nanofiber Gas-Diffusion Anodes Based on a Copolymer of Acrylonitrile with Methyl Acrylate for High-Temperature Polymer-Electrolyte Membrane Fuel Cell

In Situ Grown Carbon Nanotubes on Carbon Paper As Integrated Gas Diffusion and Catalyst Layer for Proton Exchange Membrane Fuel Cells

Rational design of carbon network structure in microporous layer toward enhanced mass transport of proton exchange membrane fuel cell

Improving proton exchange membrane fuel cell performance with carbon nanotubes as the material of cathode microporous layer

Titanate-Grafted Carbon Black-Facilitated MPLs for Advanced Proton Exchange Membrane Fuel Cells

A Highly Ordered Hydrophilic–Hydrophobic Janus Bi‐Functional Layer with Ultralow Pt Loading and Fast Gas/Water Transport for Fuel Cells

Effect of the Microporous Layer Structure and Hydrophobicity on the Performance of Direct Methanol Fuel Cells

Constructing Membrane Electrodes of Low Pt Areal Loading with the New Support of N-doped Carbon Nanocages for PEMFC

Improved Performance of High‐Temperature Proton Exchange Membrane Fuel Cells by Purified CNT Nanoporous Sheets

Phosphonated Ionomers of Intrinsic Microporosity with Partially Ordered Structure for High-Temperature Proton Exchange Membrane Fuel Cells