Abstract:This study aims to experimentally evaluate the impact of a double-sided microporous layer coating on gas diffusion layers in terms of their key properties and fuel cell performance, in comparison to conventional single-sided coated gas diffusion layers (GDLs). Vulcan black and Ketjenblack were used as the carbon black materials. This was to investigate the sensitivity of the results with respect to the type of carbon black used. The results showed that the in-plane electrical conductivity is almost insensitive to microporous layer (MPL) loading and carbon black type. Furthermore, the electrical conductivity of all the MPL-coated GDLs are slightly lower than that of the uncoated GDL. The Ketjenblack black MPL samples were found to demonstrate higher gas permeability than the Vulcan black samples. The addition of the MPL resulted in a favourable shift in pore size distribution, with prominent micropores observed in both single- and double-sided MPL-coated GDLs. Contact angle measurements indicated a slight increase in the hydrophobicity with the addition of a microporous layer, but without significant differences between carbon black types or loading levels. Cross-sectional SEM images showed that there was a higher level of MPL penetration into the carbon substrate for the GDLs coated with Vulcan black as compared to a Ketjenblack coating. In situ fuel cell testing demonstrated the superior performance of the double-sided Vulcan black MPL-coated GDL under high humidity conditions, while the single-sided Vulcan black MPL-coated GDL exhibited better performance at low humidity conditions. All the above findings have been thoroughly discussed and justified.

The function of microporous layers and the interaction between the anode and cathode in DMFCs. Part I: The double roles of microporous layers in DMFCs

Effect of the Microporous Layer Structure and Hydrophobicity on the Performance of Direct Methanol Fuel Cells

Novel Anode Electrode Structure with a Fuel Management Layer for High-Concentration Passive Direct Methanol Fuel Cells

Anode Sub-Layer in Membrane Electrode Assembly of DMFC

The microporous layer in proton exchange membrane fuel cells, from transport mechanism to structural design

A novel multi-porous and hydrophilic anode diffusion layer for DMFC

Multi-dimensional Liquid Water Transport in the Cathode of a PEM Fuel Cell with Consideration of the Micro-Porous Layer (MPL)

Critical materials and technology in direct methanol fuel cells

Polypyrrole nanowires as a cathode microporous layer for direct methanol fuel cell to enhance oxygen transport

Pore-Scale Modeling of Microporous Layer for Proton Exchange Membrane Fuel Cell: Effective Transport Properties

Improvement of Direct Methanol Fuel Cell Performance by Modifying Catalyst Coated Membrane Structure

A Liquid–Vapor Two-Phase Model of Direct Methanol Fuel Cells With Platinum Group Metal-Free Cathode Catalyst

Anode Catalysts and Cathode Catalysts of Direct Methanol Fuel Cells

Characterisation of Novel and High Performing Double-Sided Microporous-Layers-Coated Gas Diffusion Layers for Polymer Electrolyte Membrane Fuel Cells

Influence of intermediate liquid electrolyte layer on the performance of passive direct methanol fuel cell

The buffer microporous layer improved water management for proton exchange membrane fuel cell at varying humidification

A Neat Methanol Fed Passive DMFC with a New Anode Structure

Effect of Micro-Porous Layer on PEM Fuel Cells Performance: Considering the Spatially Variable Properties

Preparation and Simulation of an Additional Catalyst Layer for Direct Methanol Fuel Cell

An exploration of the solution of direct methanol fuel cell cost effectiveness

Design, Optimization and Microfabrication of a Micro-Direct Methanol Fuel Cell with Microblocks in Anode Structure