Abstract:In the present work, a numerical model for polymer electrolyte membrane fuel cell (PEMFC) has been employed to investigate the effects of porosity and contact angle distributions of the porous layer on the performance of PEMFC. The three-dimensional, two-phase, and non-isothermal flow solver considers heat transfer, electrochemical reaction, and liquid water saturation. Various cases with different cathode gas diffusion layer (GDL) porosities are performed. The results showed that a better performance is achieved when the GDL porosity is increased because of the reduced mass transport resistance of oxygen. The effects of the porosity distributions on the PEMFC performance were examined by comparing the predictions from the cases with non-uniform porosity and uniform porosity in the cathode GDL. It was shown that the current density of the cases with non-uniform porosity is higher than that of the uniform porosity case when the operation voltage is low. This is due to the fact that non-uniform porosity distributions in the cathode GDL enhance the reactant transport. When the operation voltage is high, the current densities of the cases with non-uniform porosity and uniform porosity are almost the same. Moreover, the influence of contact angle distributions in cathode GDL was explored. Various cases with gradient-decreasing, gradient-increasing, and uniform constant contact angles from GDL/channel interface to GDL/catalyst layer interface were studied. It was found that the case with gradient-increasing contact angle has a better performance due to the larger capillary pressure difference to remove more water. The poor performance of the case with gradient-decreasing contact angle is related to the phenomenon of flooding in the catalyst layer.

Effect of Micro-Porous Layer on PEM Fuel Cells Performance: Considering the Spatially Variable Properties

Recent Progress of the Gas Diffusion Layer in Proton Exchange Membrane Fuel Cells: Material and Structure Designs of Microporous Layer

Structural Design of Gas Diffusion Layer for Proton Exchange Membrane Fuel Cell at Varying Humidification

Optimization of Microporous Layer Composition at Varying Humidities for High-Performance Polymer Exchange Membrane Fuel Cell

Interfacial Water Management of Gradient Microporous Layer for Self-Humidifying Proton Exchange Membrane Fuel Cells

Using Orthorhombic Lattice Boltzmann Model to Research the Liquid Transport in Gas Diffusion Layer with Different Micro Porous Layer Coated

Modelling Water Intrusion and Oxygen Diffusion in a Reconstructed Microporous Layer of PEM Fuel Cells

Impact of gas diffusion layer spatial variation properties on water management and performance of PEM fuel cells

Structure Majorization on the Surface of Microporous Layer in Polymer Electrolyte Membrane Fuel Cells to Optimize Performance and Durability

Multi-dimensional Liquid Water Transport in the Cathode of a PEM Fuel Cell with Consideration of the Micro-Porous Layer (MPL)

Study of the effect of pore properties of microporous layer on water transport process in proton exchange membrane fuel cell

Systematic Study on the Functions and Mechanisms of Micro Porous Layer on Water Transport in Proton Exchange Membrane Fuel Cells

Microporous Layers with Different Decorative Patterns for Polymer Electrolyte Membrane Fuel Cells

A Pore Network Study on the Role of Micro-Porous Layer in Control of Liquid Water Distribution in Gas Diffusion Layer

Structural Design of Microporous Layer to Mitigate Carbon Corrosion in Proton Exchange Membrane Fuel Cells

Pore-Scale Modeling of Microporous Layer for Proton Exchange Membrane Fuel Cell: Effective Transport Properties

Optimizing the Mass-Transfer Efficiency of a Microporous Layer for High-Performance Proton Exchange Membrane Fuel Cells

Effect of Hierarchical Pores on the Water Transport in Microporous Layer of Proton Exchange Membrane Fuel Cells

Effects of Cathode Gas Diffusion Layer Porosity and Contact Angle Distributions along Through-Plane Direction on the Performance of Polymer Electrolyte Membrane Fuel Cell

Modelling and analysis on effects of penetration of microporous layer into gas diffusion layer in PEM fuel cells: Focusing on mass transport

Optimization of microporous layer perforation design for enhanced liquid water management in PEM fuel cells