Abstract:Controlling of mass transport in the anode catalyst layer has become one of the major challenges in Direct Formic Acid Fuel Cells (DFAFCs) owing to the poor formic acid transport and crossover. This study is aim to introduce the microfiber-pores designed anode catalyst layers by mean to improve the mass transport limitation and eventually improving the performance of DFAFCs. Polystyrene fibers (PSFs) were fabricated with different diameter by electrospinning prior to control their length by ultrasonic homogenization. Different amount of PSF as a pore forming agent were then added to the catalyst ink before catalyst coated membrane (CCM) were made by spraying the catalyst ink on the membrane. The CCM were then soaked in ethyl acetate solution to remove the PSF in order to improve the porous structure of anode catalyst layer. Different diameter and amount of PSFs exhibited different pore properties of the catalyst layer and its effect on the mass transport and the performance of DFAFC were then investigated. From the results, the microfiber-pores designed anode catalyst layers showed better performance remarkably at the higher current density region as compared to the conventional anode catalyst layer. Moreover, it was also found that there were optimum diameter and amount of PSF used for the highest performance of DFAFC. This could be attributed to the existence of the microfiber-pores have provide larger active catalyst region which accelerate the fuel transport and the CO 2 emission in anode catalyst layer. Thus, these results indicate that the introduction of the microfiber-pores on the anode catalyst layer is a promising approach in order to improve the mass transport resistance, leading to enhance the DFAFCs performance.

A novel multi-porous and hydrophilic anode diffusion layer for DMFC

Study on micro-porous layer by coating on carbon fiber paper as gas diffusion layer

Novel Anode Electrode Structure with a Fuel Management Layer for High-Concentration Passive Direct Methanol Fuel Cells

Constructing a graphene-contained layer in anode to improve the performance of direct methanol fuel cells using high-concentration fuel

Improved DMFC water management via superwetting, high-performance catalyst synthesized by nanocapsule method

Reduced Graphene Oxide/Carbon Paper for the Anode Diffusion Layer of a Micro Direct Methanol Fuel Cell

The function of microporous layers and the interaction between the anode and cathode in DMFCs. Part I: The double roles of microporous layers in DMFCs

Anode Sub-Layer in Membrane Electrode Assembly of DMFC

Three-dimensional graphene as gas diffusion layer for micro direct methanol fuel cell

Improvement of Direct Methanol Fuel Cell Performance by Modifying Catalyst Coated Membrane Structure

Characteristics of Controlled Nafion<sup>&#x00ae;</sup> Coating Inside Nano Structured Anode for Three-Phase Zone Arrangement in Micro DMFC

Effect of the Microporous Layer Structure and Hydrophobicity on the Performance of Direct Methanol Fuel Cells

Uniform Nafion ® coated HRA anode for high performance micro DMFC

Titanium Carbide/carbon Nanofibers Film As Flexible Gas Diffusion Layers for Passive Direct Methanol Fuel Cells

A Neat Methanol Fed Passive DMFC with a New Anode Structure

Optimizing catalyst layer structure design for improved water management of anion exchange membrane fuel cells

An ultrathin substrate-free gas diffusion layer for proton exchange membrane fuel cell

(Digital Presentation) Power-Generation and Mass-Transport Characteristics of Direct Formic Acid Fuel Cell Using Pore-Designed Anode Electrode

Polypyrrole nanowires as a cathode microporous layer for direct methanol fuel cell to enhance oxygen transport

Proton selective anode nanochannel for efficient methanol utilization

Influence of intermediate liquid electrolyte layer on the performance of passive direct methanol fuel cell