Abstract:Fe3O4 magnetic nanoparticle-anchored and Nafion-functionalized multiwalled carbon nanotubes (MWCNT-MNP-Nafion) have been prepared and used as a nano-additive for Nafion. The addition of 0.1 wt% of MWCNT-MNP-Nafion to Nafion results in the membranes showing a reduction of methanol permeability from 30.1 x 10(-7) cm(2) s(-1) to 6.8 x 10(-7) cm(2) s(-1) and an increase of proton conductivity from 31 mS cm(-1) to 78 mS cm(-1). The presence of MWCNT-MNP-Nafion reduces the ionic cluster sizes and decreases the free volume element concentration of the modified Nafion membrane. Both have been verified with small angle X-ray scattering spectroscopy and positron annihilation lifetime spectroscopy and contribute to the reduction of the methanol permeability of the membrane. The increase in the proton conductivity originates from the formation of proton-conducting pathways on the MWCNT bundles. For the membrane fabricated under a magnetic field, its proton conductivity further increases to 85 mS cm(-1) due to the magnetically-driven alignment of MWCNT-MNP-Nafion in the Nafion matrix (A-Nafion-NM-0.1). Compared to the plain recast Nafion membrane, the A-Nafion-NM-0.1 membrane has a 15-fold membrane selectivity, an 8.7-fold maximum power density, and a 6.6-fold current density at an operating voltage of 0.4 V in the tests for direct methanol fuel cells (DMFC). The high performance of the membrane in the DMFC tests demonstrates that the MWCNT-MNP-Nafion is a highly efficient additive for the preparation of Nafion-based membranes for DMFCs.

Characteristics of Controlled Nafion<sup>&#x00ae;</sup> Coating Inside Nano Structured Anode for Three-Phase Zone Arrangement in Micro DMFC

Nafion spin coating inside nano / micro structured cathode for three-phase interface control in micro-dmfc

Highly Active Nanoporous Pt-based Alloy As Anode and Cathode Catalyst for Direct Methanol Fuel Cells

Uniform Nafion ® coated HRA anode for high performance micro DMFC

Uniform Nafion (R) Coated Hra Anode For High Performance Micro Dmfc

Uniform Nafion

Micro and Nano Structured Reaction Device for Micro DMFC

A novel multi-porous and hydrophilic anode diffusion layer for DMFC

The Influences of Multi-Walled Carbon Nanotube Addition to the Anode on the Performance of Direct Methanol Fuel Cells

Constructing A Triple-Phase Interface in Micropores to Boost Performance of Fe/N/C Catalysts for Direct Methanol Fuel Cells

Improvement of Direct Methanol Fuel Cell Performance by Modifying Catalyst Coated Membrane Structure

Nanocomposite Membranes of Nafion and Fe3o4-Anchored and Nafion-Functionalized Multiwalled Carbon Nanotubes Exhibiting High Proton Conductivity and Low Methanol Permeability for Direct Methanol Fuel Cells

Anode Catalytic Dependency Behavior on Ionomer Content in Direct CO Polymer Electrolyte Membrane Fuel Cell

A Palladium-Alloy Deposited Nafion Membrane for Direct Methanol Fuel Cells

Thickness Control Over Ionomer Coatings On Nano Patterned Three-Phase Zones For A Highly Efficient Electrode

Nano porous silicon membrane with channels for micro direct methanol fuel cells

Novel Anode Electrode Structure with a Fuel Management Layer for High-Concentration Passive Direct Methanol Fuel Cells

An Ingenious Design of Nanoporous Nafion Film for Enhancing the Local Oxygen Transport in Cathode Catalyst Layers of PEMFCs

Mangrove Root-Inspired Carbon Nanotube Film for Micro-Direct Methanol Fuel Cells

Nano-structured Carbon Support for Pt/C Anode Catalyst in Direct Methanol Fuel Cell

Preparation and Characterization of Novel Nickel–palladium Electrodes Supported by Silicon Microchannel Plates for Direct Methanol Fuel Cells

Characteristics of Controlled Nafion&lt;sup&gt;&amp;#x00ae;&lt;/sup&gt; Coating Inside Nano Structured Anode for Three-Phase Zone Arrangement in Micro DMFC