Abstract:Nitrogen doping in carbon nanotubes (CNTs) is of great interest because it endows the inherently inert surface of CNTs with a variety of chemical functionalities. For instance, nitrogen-doped carbon nanotubes (NxCNTs) have been shown a promising electrode catalyst support for polymer electrolyte membrane fuel cells because the doped nitrogen atoms can promote a high dispersion of the metal catalyst nanoparticles on the NxCNT surface, which is essential for achieving a high utilization and thus high catalytic performance. However, beyond the role in nanoparticle dispersion, how nitrogen doping affects the catalytic performance in the anode and in the cathode of a realistic membrane-electrode-assembly (MEA), still remains elusive. In this report, we performed a comparative study of NxCNTs at three different N doping levels as the anode and cathode catalyst support in both rotating disk electrode (RDE) and realistic direct methanol fuel cell (DMFC) test. Our results show that nitrogen doping can play significantly conflicting roles in the anode and cathode performance: (i) A very low doping level (1at.%) is sufficient to induce a homogenous distribution of both anode (PtRu) and cathode (Pt) catalyst nanoparticles. (ii) In RDE test, while nitrogen doping can substantially increase the specific activity of the anodic methanol oxidation, it brings no specific activity enhancement in the cathodic oxygen reduction reaction (ORR), suggesting that nitrogen doping can hardly affect the ORR electrocatalysis on the Pt surface. (iii) In MEA test, a low nitrogen doping level at 1 at.% in NxCNTs as anode catalyst support resulted in a higher power density compared to non-doped CNT support at both 30 and 60°; increasing nitrogen-doping content decreased the power density, likely due to a decreased electron conduction. In contrast, at the cathode, NxCNTs support mainly showed a lower power density, particularly at 60°, which is rationalized by the increased hydrophicility and thus unflavored removal of the water. Taken together, our results provide important guidelines for application of NxCNT support at the appropriate electrode of DMFCs.

The Influences of Multi-Walled Carbon Nanotube Addition to the Anode on the Performance of Direct Methanol Fuel Cells

Highly Active Nanoporous Pt-based Alloy As Anode and Cathode Catalyst for Direct Methanol Fuel Cells

Nanocomposite Membranes of Nafion and Fe3o4-Anchored and Nafion-Functionalized Multiwalled Carbon Nanotubes Exhibiting High Proton Conductivity and Low Methanol Permeability for Direct Methanol Fuel Cells

Pt supported on phosphorus-doped carbon nanotube as an anode catalyst for direct methanol fuel cells

Nano-structured Carbon Support for Pt/C Anode Catalyst in Direct Methanol Fuel Cell

The Construction and Application of Dual‐Modified Carbon Nanotubes in Proton Exchange Membranes with Enhanced Performances

Improving proton exchange membrane fuel cell performance with carbon nanotubes as the material of cathode microporous layer

Improvement of Direct Methanol Fuel Cell Performance by Modifying Catalyst Coated Membrane Structure

Uniform Nafion ® coated HRA anode for high performance micro DMFC

Optimizing Catalyst Layer Structure with Carbon Nanofiber Additive for Better Performance of Proton Exchange Membrane Fuel Cell

Hierarchical layered double hydroxide coated carbon nanotube modified quaternized chitosan/polyvinyl alcohol for alkaline direct methanol fuel cells

Conflicting Roles of Nitrogen Doping in Carbon Nanotubes As Anode and Cathode Catalyst Support for Direct Methanol Fuel Cells

Characteristics of Controlled Nafion<sup>&#x00ae;</sup> Coating Inside Nano Structured Anode for Three-Phase Zone Arrangement in Micro DMFC

Pt/Carbon nanofiber nanocomposites as electrocatalysts for direct methanol fuel cells: prominent effects of carbon nanofiber nanostructures.

Optimizing proton exchange membrane fuel cell performance at low-humidity via constructing additional anodic water-retaining membrane layer containing sulfonated multi-walled carbon nanotubes

Mangrove Root-Inspired Carbon Nanotube Film for Micro-Direct Methanol Fuel Cells

Application of N-doped carbon nanotube-supported Pt-Ru as electrocatalyst layer in passive direct methanol fuel cell

Fabrication of a Molybdenum Dioxide/Multi-Walled Carbon Nanotubes Nanocomposite as an Anodic Modification Material for High-Performance Microbial Fuel Cells

Controllable Pt Nanoparticle Deposition on Carbon Nanotubes As an Anode Catalyst for Direct Methanol Fuel Cells

Carbon nanotube powders as electrode modifier to enhance the activity of anodic biofilm in microbial fuel cells.

Nickel Sulfide (Ni3S2)/Multi-Walled Carbon Nanotubes (MWCNTs) Nanohybrids for Enhanced Electrocatalytic Activity Towards Methanol Oxidation