Abstract:The fabrication art of the membrane electrode assembly (MEA) in a proton-exchange membrane (PEM) fuel cell strongly correlates to the cell performance. It has been recognized that defects, for example, high interfacial resistance between the catalyst layers (CLs) and the membrane or cracks in the CLs, may occur during the MEA manufacturing process. These defects could greatly influence the electrochemical performance of the fuel cell. To eliminate those defects and improve the cell performance, in this study, a novel fabrication approach of the MEA for PEM fuel cells is developed. With this method, the Nafion ionomer, employed as a PEM, is directly coated onto both the cathode and anode CLs. As a result, not only an excellent interfacial connection between the PEM and CLs is achieved with a low interfacial resistance, but also cracks are eliminated due to Nafion ionomer penetration into the cracks, forming hydrophilic channels with ionic conduction. Those ionic conduction channels improve the water management, lower the mass transport loss, and facilitate the proton transfer, thus maximizing the three-phase boundary and enhancing the utilization of Pt/C catalysts. By adding an expanded polytetrafluoroethylene film, a favorable mechanical property of the MEA is also achieved. This novel MEA exhibits excellent cell performance under low humidity conditions. Under the H<sub>2</sub>/air operation, the cell performance reaches a high maximum power density of 1.35 W cm<sup>–2</sup>.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c02386?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c02386</a>.SEM images, photographs of MEAs and fitted impedance parameters for the MEAs (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c02386/suppl_file/sc0c02386_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Optimizing proton exchange membrane fuel cell performance at low-humidity via constructing additional anodic water-retaining membrane layer containing sulfonated multi-walled carbon nanotubes

Preparation of Membrane Electrode Assemblies for Proton Exchange Membrane Fuel Cells

One Simple Method to Improve the Mass Transfer of Membrane Electrode Assembly to Realize Operation under Wide Humidity

Interfacial Water Management of Gradient Microporous Layer for Self-Humidifying Proton Exchange Membrane Fuel Cells

Microporous Layer Containing CeO2-Doped 3D Graphene Foam for Proton Exchange Membrane Fuel Cells at Varying Operating Conditions.

Control Mechanism of a Modified Buffer Layer on Interfacial Mass Transfer Efficiency for a Proton Exchange Membrane Fuel Cell at Varying Humidity

Development of Cathode Ordered Membrane Electrode Assembly Based on TiO2 Nanowire Array and Ultrasonic Spraying

Design of Membrane Electrode Assembly with Non-precious Metal Catalyst for Self-humidifying Proton Exchange Membrane Fuel Cell

Structural Design of Gas Diffusion Layer for Proton Exchange Membrane Fuel Cell at Varying Humidification

The buffer microporous layer improved water management for proton exchange membrane fuel cell at varying humidification

Improving Cell Performance and Alleviating Performance Degradation by Constructing a Novel Structure of Membrane Electrode Assembly (MEA) of DMFCs

A Novel Approach to Fabricate Membrane Electrode Assembly by Directly Coating the Nafion Ionomer on Catalyst Layers for Proton-Exchange Membrane Fuel Cells

A Novel Self-Humidifying Membrane Electrode Assembly with Water Transfer Region for Proton Exchange Membrane Fuel Cells

Efficient Drainage Design of Cathode Catalyst Layer for Pure Oxygen Proton Exchange Membrane Fuel Cells

Single-walled carbon nanotube interlayer modified gas diffusion layers to boost the cell performance of self-humidifying proton exchange membrane fuel cells

Study on Structure and Performance of a Self-Humidifying Membrane Electrode Assembly in PEMFC

Enhanced Water Management in the Cathode of an Air-Breathing PEMFC Using a Dual Catalyst Layer and Optimizing the Gas Diffusion and Microporous Layers

High-performance Membrane Electrode Assembly with Multi-Functional Pt/SnO2–SiO2/C Catalyst for Proton Exchange Membrane Fuel Cell Operated under Low-Humidity Conditions

The Performance Improvement of Membrane and Electrode Assembly in Open-Cathode Proton Exchange Membrane Fuel Cell

Membrane Electrode Assembly with Pt/SiO2/C Anode Catalyst for Proton Exchange Membrane Fuel Cell Operation under Low Humidity Conditions

Controlling Fuel Crossover and Hydration in Ultra-Thin Proton Exchange Membrane-Based Fuel Cells Using Pt-nanosheet Catalysts