Abstract:The development of proton-exchange membrane fuel cell (PEMFC) technology will give rise to a great evolution toward a more sustainable and eco-friendly life by powering clean electric vehicles or stations. However, several vital problems still hinder the commercialization of PEMFCs. The foremost issue is the high cost compared to the contenders, deriving from both the high consumption of Pt catalysts and low service life under practical operations. In this review, deeper investigations on how to further lower the cost of PEMFCs show the importance of understanding and engineering the multiphase transport processes in the membrane electrode assembly (MEA). The definitions, rules, numerical simulations, and experimental validations of various mass transfer processes across the MEA are introduced to provide a holistic evaluation and enable optimization to improve the cell performance and reliability. In addition, because the sluggish oxygen reduction reaction in the cathode catalyst layer (CCL) requires most of the Pt catalysts, the oxygen/water-related multiphase transfer in CCLs is taken as a focus for detailed analysis. Several successful strategies, such as triple-phase boundary engineering, graded design, and novel ordered three-dimensional structure construction, are proven to be promising in greatly reducing the Pt consumption in the CCL and facilitating the microscopic multiphase transfer processes of the MEA. With optimized engineering of the electrode structure and configuration inside the MEA, the mass transfer resistances can be minimized to give the best operating conditions for electrochemical reactions to occur in the catalyst layers. Finally, the main challenges and some perspectives for developing advanced MEAs with lower cost in high-performance and reliable PEMFCs are provided.

The Performance Improvement of Membrane and Electrode Assembly in Open-Cathode Proton Exchange Membrane Fuel Cell

Construction of Homogeneous Catalyst Layers at Proton Exchange Membrane Fuel Cell Cathodes

The influences of catalyst combination on the high temperature proton exchange membrane fuel cell

Optimizing proton exchange membrane fuel cell performance at low-humidity via constructing additional anodic water-retaining membrane layer containing sulfonated multi-walled carbon nanotubes

Optimization of Membrane Electrode Assembly of PEM Fuel Cell by Response Surface Method

Microscale structure optimization of catalyst layer for comprehensive performance enhancement in proton exchange membrane fuel cell

Performance improvement of ultra-low Pt proton exchange membrane fuel cell by catalyst layer structure optimization

Comprehensive study and optimization of membrane electrode assembly structural composition in proton exchange membrane water electrolyzer

Design of graded cathode catalyst layers with various ionomers for fuel cell application

Performance Enhancement of Air-Breathing Proton Exchange Membrane Fuel Cell Through Utilization of an Effective Self-Humidifying Platinum–carbon Catalyst

Effect of cathode channel structure on the performance of open-cathode proton exchange membrane fuel cell in dry environments

Improving cell performance for anion exchange membrane fuel cells with FeNC cathode by optimizing ionomer content

Study on performance of membrane electrode assembly with domestic materials for PEMFC

Heat and Mass Transfer Performance of Proton Exchange Membrane Fuel Cells with Electrode of Anisotropic Thermal Conductivity

Overcoming the Electrode Challenges of High-Temperature Proton Exchange Membrane Fuel Cells

Understanding and Engineering of Multiphase Transport Processes in Membrane Electrode Assembly of Proton-Exchange Membrane Fuel Cells with a Focus on the Cathode Catalyst Layer: A Review

Balancing proton and mass transfers in cathode catalyst layer of high-temperature proton exchange membrane fuel cell via gradient porous structure design

Non-uniform Design of Proton Exchange Membrane Fuel Cell and Its Matching with Operations

Improved Performance of High‐Temperature Proton Exchange Membrane Fuel Cells by Purified CNT Nanoporous Sheets

High-Performance Hydroxide Exchange Membrane Fuel Cells Through Optimization of Relative Humidity, Backpressure and Catalyst Selection

The buffer microporous layer improved water management for proton exchange membrane fuel cell at varying humidification