Abstract:High-temperature proton exchange membrane fuel cell (HT-PEMFCs) has the advantages of simple hydro-thermal management, strong resistance to CO, direct feeding of reforming gas and high efficiency of cogeneration. It is one of the ideal power sources for the development of clean energy. As the core component of HT-PEMFCs, membrane electrode assembly (MEA) is mainly composed of cathode and anode gas diffusion electrode and proton exchange membrane, which determines the performance and cost of HT-PEMFCs. Therefore, optimizing the structure of gas diffusion electrode (GDE) is an important means to improve the performance and reduce the cost of HT-PEMFC. In this work, from the point of view of catalytic layer, pore-forming agent was introduced into catalytic layer to construct double catalytic layer with different pore structure. Among them, MEA 2 uses 46.7% (w) PtCo/C in the inner catalyst layer without adding pore-forming agent, and the outer catalyst layer uses 40% (w) Pt/C and adds 20% (w) pore-forming agent. It has relatively small ohmic polarization, minimum mass transfer polarization and activation polarization, and has the largest electrochemical active area, and the electrochemical performance is the best. At 160 degrees C and atmospheric pressure, hydrogen and air as fuel, the maximum power density of the single cell composed of the membrane electrode is 439 mW.cm(-2), which is 69 mW.cm(-2) higher than that of the single cell without pore-forming agent. Whether the pore-forming agent is added into the inner catalytic layer (CL) or the outer CL, the pore structure is adjusted to optimize the phosphoric acid (PA) distribution and reduce the oxygen mass transfer resistance to improve the electrochemical performance. The former catalyst layer has a greater hydrophobicity change and the electrochemical performance is more affected by the PA content, while the latter catalyst layer hydrophobicity changes less and the electrochemical performance is more affected by the oxygen mass transfer resistance. Excessive addition of pore-forming agent inside or outside CL will produce larger ohmic polarization resistance (R-Omega), and the acid drowning caused by insufficient hydrophobicity of CL will further reduce the electrochemical performance of the battery.

Balancing proton and mass transfers in cathode catalyst layer of high-temperature proton exchange membrane fuel cell via gradient porous structure design

Construction of Homogeneous Catalyst Layers at Proton Exchange Membrane Fuel Cell Cathodes

Membrane Electrode Assembly Based on Buckypaper with Gradient Distribution of Platinum, Proton Conductor and Electrode Porosity

Optimizing the structural design of cathode catalyst layer for PEM fuel cells for improving mass-specific power density

Design and Study on Pore Structure of Cathode Double Catalytic Layer in High-temperature Proton Exchange Membrane Fuel Cell★

(Digital Presentation) Effects of Catalyst Dimension Parameters on Local Oxygen Transport in Cathode Catalyst Layer of Proton Exchange Membrane Fuel Cell

Enhanced Mass Transfer and Proton Conduction of Cathode Catalyst Layer for Proton Exchange Membrane Fuel Cell Through Filling Polyhedral Oligomeric Silsesquioxane

Hierarchical catalyst layer structure for enhancing local oxygen transport in low Pt proton exchange membrane fuel cells

Pt Active Site Density Optimization of the Catalyst Layer for an Ultralow-Pt-Loading PEMFC

Structural Design of Gas Diffusion Layer for Proton Exchange Membrane Fuel Cell at Varying Humidification

In-Depth Understanding of Oxygen Transfer in the Catalyst Layer of High-Temperature Proton Exchange Membrane Fuel Cells

Simulation on Cathode Catalyst Layer in Proton Exchange Membrane Fuel Cell: Sensitivity of Design Parameters to Cell Performance and Oxygen Distribution

Pore-scale study of effects of cathode catalytic layer component gradient distribution and perforation on reaction transport processes

Design and optimization of gradient wettability pore structure of adaptive PEM fuel cell cathode catalyst layer

The Mass Transport and Electrochemical Reaction in the Cathode Catalyst Layer with Ionomer/pt Gradient Distribution

A Pt content and pore structure gradient distributed catalyst layer to improve the PEMFC performance

A pore scale model study of mass transfer and electrochemical reaction in cathode catalytic layer of high-temperature polymer electrolyte membrane fuel cells

On the optimal cathode catalyst layer for polymer electrolyte fuel cells: Bimodal pore size distributions with functionalized microstructures

Pore-scale Investigation of Catalyst Layer Ingredient and Structure Effect in Proton Exchange Membrane Fuel Cell

The influences of catalyst combination on the high temperature proton exchange membrane fuel cell

Optimization of a catalyst layer with a high-utilization gradient Pt distribution for polymer electrolyte membrane fuel cells