Abstract:A high advancement has been achieved in the design of proton exchange membrane fuel cells (PEMFCs) since the development of thin-film catalyst layers (CLs). However, the progress has slowed down in the last decade due to the difficulty in reducing Pt loading, especially at the cathode side, while preserving high stack performance. This situation poses a barrier to the widespread commercialization of fuel cell vehicles, where high performance and durability are needed at a reduced cost. Exploring the technology limits is necessary to adopt successful strategies that can allow the development of improved PEMFCs for the automotive industry. In this work, a numerical model of an optimized cathode CL is presented, which combines a multiscale formulation of mass and charge transport at the nanoscale (∼10nm) and at the layer scale (∼1μm) . The effect of exterior oxygen and ohmic transport resistances are incorporated through mixed boundary conditions. The optimized CL features a vertically aligned geometry of equally spaced ionomer pillars, which are covered by a thin nanoporous electron-conductive shell. The interior surface of cylindrical nanopores is catalyzed with a Pt skin (atomic thickness), so that triple phase points are provided by liquid water. The results show the need to develop thin CLs with bimodal pore size distributions and functionalized microstructures to maximize the utilization of water-filled nanopores in which oxygen transport is facilitated compared with ionomer thin films. Proton transport across the CL must be assisted by low-tortuosity ionomer regions, which provide highways for proton transport. Large secondary pores are beneficial to facilitate oxygen distribution and water removal. Ultimate targets set by the U.S. Department of Energy and other governments can be achieved by an optimization of the CL microstructure with a high electrochemical surface area, a reduction of the oxygen transport resistance from the channel to the CL, and an increase of the catalyst activity (or maintaining a similar activity with Pt alloys). Carbon-free supports (e.g., polymer or metal) are preferred to avoid corrosion and enlarge durability.

Optimization of a catalyst layer with a high-utilization gradient Pt distribution for polymer electrolyte membrane fuel cells

Optimal gradient designs of catalyst layers for boosting performance: A data-driven-assisted model

On the optimal cathode catalyst layer for polymer electrolyte fuel cells: Bimodal pore size distributions with functionalized microstructures

A unified catalyst layer design classification criterion on proton exchange membrane fuel cell performance based on a modified agglomerate model

Optimization of graded catalyst layer to enhance uniformity of current density and performance of high temperature-polymer electrolyte membrane fuel cell

Pore-scale study of effects of cathode catalytic layer component gradient distribution and perforation on reaction transport processes

Hierarchical catalyst layer structure for enhancing local oxygen transport in low Pt proton exchange membrane fuel cells

Balancing proton and mass transfers in cathode catalyst layer of high-temperature proton exchange membrane fuel cell via gradient porous structure design

Optimizing design of catalyst layer structure with carbon-supported platinum weight ratio mixing method for proton exchange membrane fuel cells

Pore-scale study of effects of different Pt loading reduction schemes on reactive transport processes in catalyst layers of proton exchange membrane fuel cells

Design and optimization of gradient wettability pore structure of adaptive PEM fuel cell cathode catalyst layer

Gradient design of Pt/C ratio and Nafion content in cathode catalyst layer of PEMFCs

Semi-ordered catalyst layer with ultra-low Pt loading for proton exchange membrane fuel cells

Multiscale study of reactive transport and multiphase heat transfer processes in catalyst layers of proton exchange membrane fuel cells

Multi-objective optimization of the cathode catalyst layer micro-composition of polymer electrolyte membrane fuel cells using a multi-scale, two-phase fuel cell model and data-driven surrogates

Pt utilization in proton exchange membrane fuel cells: structure impacting factors and mechanistic insights

Microscale structure optimization of catalyst layer for comprehensive performance enhancement in proton exchange membrane fuel cell

Lattice Boltzmann Study of the Effect of Catalyst Layer Structure on Oxygen Reduction Reaction Within a PEMFC

Numerical Investigation of Tridirectionally Synergetic Nafion® Ionomer Gradient Cathode Catalyst Layer for Polymer Electrolyte Membrane Fuel Cells

Study of optimal step-wise distributions of platinum and carbon loading in cathode catalyst layer of a proton exchange membrane fuel cell

Optimization of polymer electrolyte fuel cell cathode catalyst layers via direct numerical simulation modeling