Abstract:To attain more uniform CCL temperature and higher power density, multi‐objective optimization is performed by combining the NSGA II and a PEMFC model. The gradient‐decline distribution of ionomer towards MPL contributes to the larger power density and effective utilization of ionomer. After optimization, the CCL temperature becomes more uniform by affecting the local oxygen transport resistance across the ionomer film and the reaction rate. Low voltage and high RH conditions are highly sensitive to the ionomer‐gradient design. Summary Temperature uniformity (TU) of the cathode catalyst layer (CCL) and the power density are two key parameters to describe a fuel cell durability and performance. To achieve desired TU and output performance, a one‐dimensional, non‐isothermal, two‐phase model coupled with a CCL agglomerate submodel is developed and validated in terms of the polarization curve, ohmic impedance and total oxygen transport resistance. Then, the ideal ionomer‐gradient distribution across the triple‐layer CCL is attained by a combination of Non‐dominated Sorting Genetic Algorithm II (NSGA II) and TOPSIS. The results present that the gradient‐decline distribution of ionomer towards the microporous layer (MPL) contributes to the larger power density and effective utilization of ionomer. The fuel cell can also operate at higher power with a top voltage range (TVR). After optimization, the ideal ionomer‐gradient distribution affects the distribution of the total heat source by affecting the local oxygen transport resistance across the ionomer film and the volumetric current density (Jc ). As a result, the maximum temperature point in CCL is more likely to occur near the MPL and the CCL temperature becomes more uniform. Besides, the optimum ionomer‐gradient values tend to be different in various operating voltages and RH cases. However, low voltage and high RH conditions are more highly sensitive to the ionomer‐gradient design. It is possible to maintain a proper TU and desired output performance by optimizing the CCL gradient structure, especially for the stationary PEMFC that operates with a particular condition for a long time. Research Highlights A 1D, non‐isothermal, two‐phase model is validated from multiple aspects. Multi‐objective optimization is performed by combining the NSGA II and numerical model. More uniform CCL temperature and higher power density are achieved after optimization.

Numerical Investigation of Tridirectionally Synergetic Nafion® Ionomer Gradient Cathode Catalyst Layer for Polymer Electrolyte Membrane Fuel Cells

Construction of Homogeneous Catalyst Layers at Proton Exchange Membrane Fuel Cell Cathodes

Reshaping the Cathodic Catalyst Layer for Anion Exchange Membrane Fuel Cells: from Heterogeneous Catalysis to Homogeneous Catalysis

Design of graded cathode catalyst layers with various ionomers for fuel cell application

Three-dimensional numerical study of a cathode gas diffusion layer with a through/in plane synergetic gradient porosity distribution for PEM fuel cells

Numerical Investigation of Tapered Flow Field Configurations for Enhanced Polymer Electrolyte Membrane Fuel Cell Performance

Introducing Catalyst in Alkaline Membrane for Improved Performance Direct Borohydride Fuel Cells

Optimization of graded catalyst layer to enhance uniformity of current density and performance of high temperature-polymer electrolyte membrane fuel cell

Optimization of a catalyst layer with a high-utilization gradient Pt distribution for polymer electrolyte membrane fuel cells

Optimization of polymer electrolyte fuel cell cathode catalyst layers via direct numerical simulation modeling

Balancing proton and mass transfers in cathode catalyst layer of high-temperature proton exchange membrane fuel cell via gradient porous structure design

Multi‐objective optimization of temperature uniformity in cathode catalyst layer and performance of PEMFC with an ionomer‐gradient design

Design and optimization of gradient wettability pore structure of adaptive PEM fuel cell cathode catalyst layer

Numerical Investigation of Anisotropic Gas Diffusion Layers with Graded Porosity and Wettability in Anion Exchange Membrane Fuel Cells

Numerical Optimization of Triple-Phase Components in Order-Structured Cathode Catalyst Layer of a Proton Exchange Membrane Fuel Cell

Ionomer structure and component transport in the cathode catalyst layer of PEM fuel cells: A molecular dynamics study

Gradient design of Pt/C ratio and Nafion content in cathode catalyst layer of PEMFCs

Modeling of the Effects of Cathode Catalyst Layer Design Parameters on Performance of Polymer Electrolyte Membrane Fuel Cell

Segmented distribution of gas diffusion layer porosity and catalyst layer ionomer content in a polymer electrolyte membrane fuel cell

Optimal Design of Cathode Gas Diffusion Layer with Arrayed Grooves for Performance Enhancement of a PEM Fuel Cell