Abstract:Publication date: 8 April 2024 Source: Journal of Nano Research Vol. 82 Author(s): Mayetu E. Segale, Touhami Mokrani, Rudzani A. Sigwadi Nafion®/silica nanocomposite membranes were prepared by impregnation method from Nafion® 117 and sol-gel pre-synthesized n-octadecyl-trimethoxy silane (C18TMS) coated silica nanoparticles. The scanning electron microscope (SEM) of pristine silica particles displayed monodispersed nanospheres with diameters ranging from 150-350 nm; while Brunauer-Emmett-Teller (BET) analysis presented 760 m2/g BET surface area, a micropore-mesopore bimodal distribution of micropore systems with respective pore volume at 14.6 Å and 17.0 Å (2.01 x 10-3 cm3/g.Å), as well as the prolific mesopores centered at 29.5 Å (5.64 x 10-2 cm3/g.Å). Characterization of Nafion® 117 based membranes on SEM, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and x-ray diffraction (XRD), and tensile stress exhibited varying surface morphology with silica loadings, structural interaction between membrane support and the ion exchanger, thermal stabilities (up to 330 °C), crystalline nature, and reasonable mechanical stability of nanocomposite membranes. The maximum water uptake (44.8 %) and proton conductivity of (1.14 x10-2 S/cm) were obtained on low Nafion®/SiO2 (5%) loaded membrane. While both composite membranes displayed the improved reduction in methanol permeability, 2.43x10-07 cm2/s at 80 °C was obtained with high Nafion®/SiO2 (10%) loading. Improved water uptake and proton conductivity substantiate the high ion exchange capacity (IEC) of 1.81 meq.g-1 when compared to IEC of 0.93 meq.g-1 [pristine Nafion®] and 1.46 meq.g-1 [Nafion®/SiO2 (10%)]. The increase in IEC value may be due to the high acid functionalization of additional sulfonic acid groups surrounded by hydrophilic segments of nanosilica, which improves the properties of the membrane. The high proton conductivity coupled with great water retention capabilities indicated that the Nafion®/SiO2 nanocomposite membranes could be utilized as proton exchange membranes for medium temperature methanol fuel cells. Keywords: Fuel cells; nanocomposite membrane; SiO2 nanofillers; methanol permeability; ion exchange capacity

Novel-SiO2-Doped Proton Exchange Membrane for Self-Humidifying Fuel Cell

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

Preparation of a self-humidifying membrane electrode assembly for fuel cell and its performance analysis

Study of Novel Self-Humidifying PEMFC with Nano-TiO<sub>2</sub>-Based Membrane

Study of Novel Self-Humidifying PEMFC with Nano-TiO2-Based Membrane

Improved Performance of Sulfonated Poly Ether Ether Ketone/three-Dimensional Hierarchical Molybdenum Disulfide Nanoflower Composite Proton Exchange Membrane for Fuel Cells

Composite Membranes from Quaternized Chitosan Reinforced with Surface-Functionalized PVDF Electrospun Nanofibers for Alkaline Direct Methanol Fuel Cells

Synthesis and Characterization of Enhanced Proton-Conducting Nafion® 117- Silica Composite Membranes for Fuel Cell Applications

A “H2O Donating/methanol Accepting” Platform for Preparation of Highly Selective Nafion-based Proton Exchange Membranes

Preparation of nano-porous SiO2-gel and its application in proton exchange membrane fuel cell

Optimizing proton exchange membrane fuel cell performance at low-humidity via constructing additional anodic water-retaining membrane layer containing sulfonated multi-walled carbon nanotubes

Composite Proton Conductive Membranes for Elevated Temperature and Reduced Relative Humidity PEMFC

Self-humidifying novel chitosan-geopolymer hybrid membrane for fuel cell applications

Preparation of novel nano-SiO2-gel additive and performance of PEM fuel cell

Enhanced Proton Conductivity of Sulfonated Polysulfone Membranes under Low Humidity via the Incorporation of Multifunctional Graphene Oxide

Preparation of a Novel Silica Gel for Electrode Additive of PEMFCs

Membrane Electrode Assembly with Pt/SiO2/C Anode Catalyst for Proton Exchange Membrane Fuel Cell Operation under Low Humidity Conditions

Self-humidification of a PEM fuel cell using a novel Pt/SiO2/C anode catalyst

Enhanced proton conduction of crystalline organic salt hybrid membranes and the performance of fuel cells

Preparation and evaluation of a novel self-humidifying Pt/PFSA composite membrane for PEM fuel cell