Abstract:A numerical simulation by using a three-dimensional multiphase polymer electrolyte membrane (PEM) fuel cell model and the volume of fluid (VOF) method is performed to investigate a newly designed hybrid wettability gas diffusion layer (GDL) for performance enhancement of PEM fuel cells. The hybrid wettability GDL has interchangeable distributions of relatively low and high hydrophobic regions along the gas flow direction. The low hydrophobic regions are characterized by high porosity and low water removal performance, whereas the high hydrophobic regions have low porosity and strong water removal ability. Simulation results show that the water removal process, mass diffusion and output performance of fuel cells greatly depend on the wettability degree distribution in the hybrid wettability GDL. In comparison with conventional GDL designs, the hybrid wettability GDL with polytetrafluoroethylene (PTFE) content of 10 wt% and 20 wt% for low and high hydrophobic regions at 1.5 mm intervals exhibits advantages in the enhancement of water removal from the gas flow channel and the mass diffusion within porous electrodes. Therefore, it can improve the uniform distribution of oxygen, the liquid water saturation and the reaction rate and ultimately benefit the stable operation and output performance of PEM fuel cells. Result also shows that the limiting current density of the optimal hybrid wettability GDL increases by 4.45% compared with that of the conventional GDL with PTFE content of 20 wt%. Furthermore, the study reveals that hybrid wettability GDL designs exhibit a greater advantage at high RHs than at low RHs.

Single-walled carbon nanotube interlayer modified gas diffusion layers to boost the cell performance of self-humidifying proton exchange membrane fuel cells

Hierarchical Carbon Nanotube Hybrid Films Modified Gas Diffusion Layer for High-Performance Proton-Exchange Membrane Fuel Cells

A novel hydrophilic‐modified gas diffusion layer for proton exchange membrane fuel cells operating in low humidification

The buffer microporous layer improved water management for proton exchange membrane fuel cell at varying humidification

Optimizing proton exchange membrane fuel cell performance at low-humidity via constructing additional anodic water-retaining membrane layer containing sulfonated multi-walled carbon nanotubes

Carbon nanotube‐deposited layer on cathodic catalyst layer in polymer electrolyte membrane fuel cell for enhanced performance in low humidity condition

Hydrophobicity enhancement of gas diffusion layer induced by hydrothermal deposition process and the electrochemical performance of proton exchange membrane fuel cell

Cultivating titanium dioxide nanoarrays on gas diffusion layer for advancing self-humidifying proton exchange membrane fuel cell

Rational design of carbon network structure in microporous layer toward enhanced mass transport of proton exchange membrane fuel cell

An ultrathin substrate-free gas diffusion layer for proton exchange membrane fuel cell

Two-Stage Microporous Layers with Gradient Pore Size Structure for Improving the Performance of Proton Exchange Membrane Fuel Cells

A New Integrated GDL with Wavy Channel and Tunneled Rib for High Power Density PEMFC at Low Back Pressure and Wide Humidity

Performance Enhancement of Polymer Electrolyte Membrane Fuel Cells with a Hybrid Wettability Gas Diffusion Layer

Dual-functional phosphoric acid-loaded covalent organic framework for PEMFC self-humidification: Optimization on membrane electrode assembly

Electrospun gas diffusion layers with reverse gradient pore structures for proton exchange membrane fuel cells under low humidity

Proton Exchange Membrane Fuel Cell with Humidifying Zone

Performance Enhancement of Proton Exchange Membrane Fuel Cell through Carbon Nanofibers Grown In Situ on Carbon Paper

Designing self-humidifying proton exchange membrane fuel cells by using patterned acid-alkaline hybrid cathodes

Effect of catalyst layer with zeolite on the performance of a proton exchange membrane fuel cell operated under low-humidity conditions

Gradient Hydrophobic Microporous Layer for High-Performance Proton-Exchange Membrane Fuel Cells

A novel preparation for a self-humidifying membrane electrode assembly and performance of its fuel cell