Abstract:Direct methanol fuel cells (DMFCs) offer a promising power source by utilizing liquid-state methanol as fuel, providing easy storage and transportability. Currently, DMFCs commonly employ perfluorosulfonic acid membranes, such as the well-known Nafion membrane, as proton exchange membranes. However, perfluorosulfonic acid membranes have significant drawbacks in DMFCs, including a high crossover rate, substantial swelling, poor thermal stability, and elevated costs. The crossover of methanol fuel to the cathode side is particularly detrimental as it can poison the precious Pt catalyst, leading to damage in the fuel cell system. In this manuscript, we propose a non-ionic proton exchange membrane based on the polycarbonate track etched (PCTE) membrane. The aligned nanopores in pristine PCTE, with a regular diameter, facilitate proton passage while mitigating the crossover of methanol molecules. This results in satisfactory proton conductivity and selectivity comparable to that of the commercial Gore membrane. By adding a layer of graphene treated with oxygen plasma for 10 seconds, methanol permeation can be reduced by 16.44%, while achieving a 42.11% increase in proton conductivity compared to the commercial Gore membrane. Furthermore, PCTE material offers a more cost-effective alternative to Gore membrane, with a 18.37% lower swelling ratio and significantly higher stability. These characteristics make PCTE a promising choice for DMFCs, offering potential improvements in performance and cost-effectiveness.

Titanium Carbide/carbon Nanofibers Film As Flexible Gas Diffusion Layers for Passive Direct Methanol Fuel Cells

A CNT (carbon Nanotube) Paper As Cathode Gas Diffusion Electrode for Water Management of Passive Μ-Dmfc (Micro-Direct Methanol Fuel Cell) with Highly Concentrated Methanol

High-Performance, Stable, and Flexible Direct Methanol Fuel Cell Based on a Pre-swelling Kalium Polyacrylate Gel Electrolyte and Single-Atom Cathode Catalyst

A Novel Cathode Gas Diffusion Layer for Water Management of Passive Μ-Dmfc

Mangrove Root-Inspired Carbon Nanotube Film for Micro-Direct Methanol Fuel Cells

Using Woven Carbon Fiber Fabric to Construct Gradient Porous Structure for Passive Direct Methanol Fuel Cells

Three-dimensional graphene as gas diffusion layer for micro direct methanol fuel cell

Effect of the Microporous Layer Structure and Hydrophobicity on the Performance of Direct Methanol Fuel Cells

Improvement of Direct Methanol Fuel Cell Performance by Modifying Catalyst Coated Membrane Structure

Passive direct methanol fuel cell using woven carbon fiber fabric as mass transfer control medium

An Ultra-Thin, Flexible, Low-Cost and Scalable Gas Diffusion Layer Composed of Carbon Nanotubes for High-Performance Fuel Cells

Evaluation and Optimization of Polycarbonate Track-Etched (PCTE) Membranes for Direct Methanol Fuel Cells.

Novel Anode Electrode Structure with a Fuel Management Layer for High-Concentration Passive Direct Methanol Fuel Cells

Critical materials and technology in direct methanol fuel cells

Hierarchical Carbon Nanotube Hybrid Films Modified Gas Diffusion Layer for High-Performance Proton-Exchange Membrane Fuel Cells

A novel MEA architecture for improving the performance of a DMFC

A Flexible Micro Direct Methanol Fuel Cells Array Based on FPCB

A Direct Methanol Fuel Cell Without the Use of a Polymer Electrolyte Membrane or Precious Metal Cathode Catalyst

Design and Fabrication of High Performance Passive Micro Direct Methanol Fuel Cell

Anodic diffusion layer with graphene-carbon nanotubes composite material for passive direct methanol fuel cell

An ultrathin substrate-free gas diffusion layer for proton exchange membrane fuel cell