Abstract:Direct methanol fuel cells (DMFCs) have attracted extensive attention as promising next-generation energy conversion devices. However, commercialized proton exchange membranes (PEMs) hardly fulfill the demand of methanol tolerance for DMFCs employing high-concentration methanol solutions. Herein, we report a series of semi-crystalline poly(arylene ether ketone) PEMs with ultra-densely sulfonic-acid-functionalized pendants linked by flexible alkyl chains, namely, SL-SPEK- x (where x represents the molar ratio of the novel monomer containing multiple phenyl side chain to the bisfluoride monomers). The delicate structural design rendered SL-SPEK- x membranes with high crystallinity and well-defined nanoscale phase separation between hydrophilic and hydrophobic phases. The reinforcement from poly(ether ketone) crystals enabled membranes with inhibited dimensional variation and methanol penetration. Furthermore, microphase separation significantly enhanced proton conductivity. The SL-SPEK-12.5 membrane achieved the optimum trade-off between proton conductivity (0.182 S cm −1 , 80 °C), water swelling (13.6%, 80 °C), and methanol permeability (1.6×10 −7 cm 2 s −1 ). The DMFC assembled by the SL-SPEK-12.5 membrane operated smoothly with a 10 M methanol solution, outputting a maximum power density of 158.3 mW cm −2 , nearly twice that of Nafion 117 (94.2 mW cm −2 ). Overall, the novel structural optimization strategy provides the possibility of PEMs surviving in high-concentration methanol solutions, thus facilitating the miniaturization and portability of DMFC devices.

A High-Performance Direct Methanol Fuel Cell Technology Enabled by Mediating High-Concentration Methanol Through a Graphene Aerogel

Effect of graphene aerogel as a catalyst layer additive on performance of direct methanol fuel cell

Novel Anode Electrode Structure with a Fuel Management Layer for High-Concentration Passive Direct Methanol Fuel Cells

Constructing a graphene-contained layer in anode to improve the performance of direct methanol fuel cells using high-concentration fuel

Three-dimensional graphene as gas diffusion layer for micro direct methanol fuel cell

Critical materials and technology in direct methanol fuel cells

A Neat Methanol Fed Passive DMFC with a New Anode Structure

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

Design, Fabrication and Testing of a Silicon-Based Air-Breathing Micro Direct Methanol Fuel Cell

Development of MEMS-based direct methanol fuel cell with high power density using nanoimprint technology

Optimization of Membrane Electrode Assembly in Air-Breathing Direct Methanol Fuel Cell

Effect of Methanol Concentration on Performance of Passive DMFC

A Methanol Fuel Processing System with Methanol Steam Reforming and CO Selective Methanation Modules for PEMFC Application

Design and Fabrication of a Polymer-Based Micro Direct Methanol Fuel Cell

Design, Optimization and Microfabrication of a Micro-Direct Methanol Fuel Cell with Microblocks in Anode Structure

A breakthrough in the performance and fuel utilization of methanol microfluidic fuel cell via viscous co-flow electrolyte

Improvement of Direct Methanol Fuel Cell Performance by Modifying Catalyst Coated Membrane Structure

Structural optimization and performance trade-off strategies for semi-crystalline sulfonated poly(arylene ether ketone) membranes in high-concentration direct methanol fuel cells

An Air-Breathing Micro Direct Methanol Fuel Cell with 3D KOH-Etched Cathode Structure

Grafted polymer electrolyte membrane for direct methanol fuel cells

A micro-direct methanol fuel cell stack with optimized design and microfabrication