Abstract:As a key component of direct methanol fuel cells (DMFCs), proton exchange membranes (PEMs) are required to be mechanically robust, methanol-resistant, and conductive to protons. In this work, a novel sulfonated poly (ether ether ketone) (SPEEK) impregnated poly(vinylidene fluoride) (PVDF) electrospun nanofiber membrane was prepared. To avoid the collapse of PVDF fiber framework by the solvent of SPEEK, we designed a SPEEK/solvent/nonsolvent ternary filling system through the cloud point titration curves. Meanwhile, polydopamine (PDA), an extraordinarily adhesive and hydrophilic material, was coated on the surface of PVDF nanofibers to further improve the interface bonding between SPEEK and PVDF. The introduction of PVDF nanofibers completely changed the rigidity of SPEEK thus achieving a 5.4-fold increase of toughness when compared with that of pure SPEEK at dry state. Notably, significantly improved methanol barrier ability was also obtained due to the tortuous methanol crossover pathways caused by the embedded PVDF nanofibers. In the DMFC tests, the ultralow methanol permeability and relatively high proton conductivity of the obtained composite membrane made it could be operated with 5 M methanol fuel and showed a peak power density of 104.0 mW cm(-2), which was higher than the values of 89.3 mW cm(-2) (2 M methanol) and 84.0 mW cm(-2) (5 M methanol) recorded with commercial Nafion 115 membrane.

Design and Fabrication of a Polymer-Based Micro Direct Methanol Fuel Cell

Design, Fabrication and Testing of a Silicon-Based Air-Breathing Micro Direct Methanol Fuel Cell

A Micro Direct Methanol Fuel Cell Using PDMS Assembly Technology

Design, Optimization and Microfabrication of a Micro-Direct Methanol Fuel Cell with Microblocks in Anode Structure

A micro-direct methanol fuel cell stack with optimized design and microfabrication

Design and fabrication of a silicon-based micro direct methanol fuel cell stack

A Monolithic Integrated Micro Direct Methanol Fuel Cell Based on Sulfo Functionalized Porous Silicon

A Silicon-Based Micro Direct Methanol Fuel Cell Stack with Compact Structure and PDMS Packaging

Fabrication of PMMA-based Mini-Direct Methanol Fuel Cell for Portable Devices

An Air-Breathing Micro Direct Methanol Fuel Cell with 3D KOH-Etched Cathode Structure

Development of MEMS-based direct methanol fuel cell with high power density using nanoimprint technology

A Silicon-Based Micro Direct Methanol Fuel Cell with Microblocks in Anode Structure

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

A Novel Assembly Method for a Micro Direct Methanol Fuel Cell Using Multi-Layer Bonding Technique

Design and Fabrication of Fuel-Self-Propelled Reaction Device for Passive Micro Direct Methanol Fuel Cell Anodes

Development of Integrated Thermally Autonomous Reformed Methanol-Proton Exchange Membrane Fuel Cell System

Fabrication of Micro Direct Methanol Fuel Cell Based on ME MS Technologies

Miniaturized silicon-based direct methanol fuel cell

A Neat Methanol Fed Passive DMFC with a New Anode Structure

Capillary-based Water Removal Cathode for an Air-Breathing Micro Direct Methanol Fuel Cell

Effect of the Microporous Layer Structure and Hydrophobicity on the Performance of Direct Methanol Fuel Cells