Abstract:An air-breathing 10-cell micro direct methanol fuel cell (mu DMFC) stack with four anode feeding patterns is designed, fabricated and tested. For a better understanding of the operational characteristics of both the single cell and the stack, a two-dimensional numerical model is established and calculated. Employing micro-stamping technology, the current collectors of each single cell are microfabricated on the stainless steel plate with a thickness of 300 mu m. The single mu DMFC is first tested under various operating parameters. On the basis of the simulation and experimental observation of the single cell performance, the mu DMFC stack performance is thoroughly analyzed with different anode feeding patterns. The results indicate that the mu DMFC stack with pattern B can ensure the uniform performance of each single cell and generate the highest power output. With pattern B, further experiments are carried out to investigate the influence of the anode flow rate on the stack performance. As a result, the mu DMFC stack achieves the best performance with the maximum power density of about 24.75 mW cm(-2) at 5.0 ml min(-1). Finally, the stack is successfully applied to two electronic devices of different rated power.

A Silicon-Based Micro Direct Methanol Fuel Cell Stack with Compact Structure and PDMS Packaging

Design and fabrication of a silicon-based micro direct methanol fuel cell stack

A micro-direct methanol fuel cell stack with optimized design and microfabrication

An Air-Breathing Micro Direct Methanol Fuel Cell Stack Employing a Single Shared Anode Using Silicon Microfabrication Technologies

Design Of Mems-Based Micro Direct Methanol Fuel Cell Stack

A Micro Direct Methanol Fuel Cell Using PDMS Assembly Technology

A Silicon-Based Micro Direct Methanol Fuel Cell with Microblocks in Anode Structure

Design, Optimization and Microfabrication of a Micro-Direct Methanol Fuel Cell with Microblocks in Anode Structure

Experimental investigation of the dynamic performance of a microdirect methanol fuel cell stack for practical applications

Investigation of a Small-Volume Direct Methanol Fuel Cell Stack for Portable Applications

Development of a 4-cell air-breathing micro direct methanol fuel cell stack

Development and Characterization of A Novel Air-Breathing Micro Direct Methanol Fuel Cell Stack for Portable Applications

Design, Fabrication and Testing of a Silicon-Based Air-Breathing Micro Direct Methanol Fuel Cell

Design and Fabrication of a Polymer-Based Micro Direct Methanol Fuel Cell

A Novel Assembly Method for a Micro Direct Methanol Fuel Cell Using Multi-Layer Bonding Technique

A Micro Dmfc Based On Silicon Micromachining Technology

Development of a self-breathing silicon-based micro direct methanol fuel cell stack

Design of the Micro Passive Airbreathing Direct Methanol Fuel Cell Stack

Miniaturized silicon-based direct methanol fuel cell

Performance Research of a Silicon-Based Micro Direct Methanol Fuel Cell

Design and fabrication of novel portable passive DMFC stack