Abstract:Proton exchange membrane fuel cells (PEMFCs) require efficient water management. Microporous layers (MPLs) are crucial to solve this problem due to their positive effects on the two-phase mass transfer process. The performance of MPLs is mainly determined by the properties of the materials used for their construction as well as other basic transport properties, including morphology, porous structure, wettability, and electrical resistivity. In this study, graphite and reduced graphene oxide (rGO) were used as the main components to fabricate MPLs for use in PEMFCs because they are highly conductive and thermally efficient. Single-layer MPLs are prepared by compressing MPL powders with different proportions of ingredients. In contrast, two-layer gas diffusion layers were fabricated by applying MPL pastes to a benchmark Toray carbon paper using a screen-printing process. FTIR and XRD analysis of main components and some samples are performed to investigated functional groups and the nature of MPLs' surface, respectively. An analysis of the effects of graphite, rGO, and hydrophobic agents' constituents on the physical properties (electrical resistivity, contact angle, roughness, porosity, and permeability) of the fabricated MPL or MPL-coated carbon papers by screen-printing method has been performed. Also, the effect of different coating methods (screen-printing and spraying) on different properties of graphite-based and rGO-based MPLs has been investigated. The results show that composites based on rGO have higher electrical resistivity than that of graphite-based MPLs, but lower roughness. However, MPLs based on rGO exhibit better contact angle, higher porosity, and improved gas permeability. Moreover, as expected, the contact angle and electrical resistivity increase, while the porosity and permeability decrease when the hydrophobic agents (polytetrafluoroethylene, and polyvinylidene difluoride) which are also used as binders, are increased. On the other hand, screen printed graphite-based MPL has lower electrical resistivity, while screen printed rGO-based MPL has higher porosity percentage, roughness, and permeability than the sprayed one.

Study on micro-porous layer by coating on carbon fiber paper as gas diffusion layer

Interfacial Modiﬁcation and Dispersion of Short Carbon Fiber and the Properties of Composite Papers As Gas Diffusion Layer for Proton Exchange Membrane Fuel Cell (PEMFC)

Study on modification of carbon fiber and performance of carbon paper as gas diffusion layer

Preparation of Gas Diffusion Carbon Paper and Its Uniformity Analysis

Investigating the role of graphite and reduced graphene oxide in the fabrication of microporous layers for proton exchange membrane fuel cells

Study of the effect of pore properties of microporous layer on water transport process in proton exchange membrane fuel cell

Structure and properties of carbon fiber paper with gradient porous structure

Performance Enhancement of Proton Exchange Membrane Fuel Cell through Carbon Nanofibers Grown In Situ on Carbon Paper

Rational design of carbon network structure in microporous layer toward enhanced mass transport of proton exchange membrane fuel cell

Effects of the carbon black properties in gas diffusion layer on the performance of proton exchange membrane fuel cells

Silane-functionalized Carbon with Super-Hydrophobicity Advancing Microporous Layer for Proton Exchange Membrane Fuel Cells

Superhydrophobic Carbon Functionalized by Chemical Grafting of Fluoroalkylsilane Enables an Efficient Microporous Layer for Proton-Exchange Membrane Fuel Cells

Two-Stage Microporous Layers with Gradient Pore Size Structure for Improving the Performance of Proton Exchange Membrane Fuel Cells

Highly flat and highly homogeneous carbon paper with ultra-thin thickness for high-performance proton exchange membrane fuel cell (PEMFC)

Effects of fluorinated ethylene propylene contents in a novel gas diffusion layer on cell performance of a proton exchange membrane fuel cell

Effect of pore size distribution in the gas diffusion layer adjusted by composite carbon black on fuel cell performance

High-Performance Proton Exchange Membrane Fuel Cells Enabled by Highly Hydrophobic Hierarchical Microporous Carbon Layers Grafted with Silane

Improving water management in gas diffusion layers through the optimization of carbon composite microporous layers

Characterisation of Novel and High Performing Double-Sided Microporous-Layers-Coated Gas Diffusion Layers for Polymer Electrolyte Membrane Fuel Cells

In Situ Flame-Synthesized Carbon Nanotubes on Carbon Paper as a Microporous Layer for Proton Exchange Membrane Fuel Cells

Pore-Scale Modeling of Microporous Layer for Proton Exchange Membrane Fuel Cell: Effective Transport Properties