Abstract:Increasing the conductivity of gas diffusion layers (GDLs) is an important way to improve the output performance of polymer electrolyte membrane fuel cells (PEMFCs). However, the complex porous fiber structures of GDLs significantly enhances the difficulty of quantitatively altering their conductivity which is determined by the carbon fibers and the conduction characteristics between fibers. In addition, the microstructures of various types of GDLs are different. Thus, it is a considerable challenge to explore the conductive mechanisms of these porous materials and optimize their structures to reduce their bulk resistances. In this work, a mathematical graph theory model that applies to the through-plane (T-P) bulk resistance prediction of two types of commonly used GDLs, carbon paper and carbon felt, is established to explain their different micro conduction mechanisms in depth. In addition to the number of fiber contact points, their distribution, as well as the resistance of the carbon fibers, are all important factors affecting the T-P conductivity. Optimizing fiber density and fiber diameter can significantly improve the T-P conductivity of carbon paper. In comparison, making the structure of carbon felt more compact so that the distribution of its contact points in the T-P direction can be more uniform will be more effective for the reduction of its T-P bulk resistance. Meanwhile, the T-P bulk resistance of carbon paper can also be effectively improved by optimizing the content and distribution of the binders. A method to decline the bulk resistance of carbon paper by aggregating the binders in the in-plane (IP) direction is proposed. The simulation results show that it can reduce the T-P bulk resistance of carbon paper by about 19.9% at a compressive stress of 1.5 MPa. This study provides further guidance for optimizing the structural designs of GDLs to optimize their conduction performance.

Preparation of Gas Diffusion Carbon Paper and Its Uniformity Analysis

Interfacial Modiﬁcation and Dispersion of Short Carbon Fiber and the Properties of Composite Papers As Gas Diffusion Layer for Proton Exchange Membrane Fuel Cell (PEMFC)

Study on modification of carbon fiber and performance of carbon paper as gas diffusion layer

Study on micro-porous layer by coating on carbon fiber paper as gas diffusion layer

Effect of Different Chemical Treatments on the Dispersion Properties of Carbon Fiber and Paper Properties

Research on Surface Treatment of Carbon Fiber and the Conductive Properties of Paper

Chemical Treatment of Carbon Fibers and the Development of Functional Paper

Highly flat and highly homogeneous carbon paper with ultra-thin thickness for high-performance proton exchange membrane fuel cell (PEMFC)

Efficient preparation and characterization of carbon fiber paper using phenolic resin in-pulp addition method

Study of Preparing Paste Used for Gas Diffusion Layer for PEMFC

Influence of carbon paper on self humidifying performance of PEMFC

Influence of cathode gas diffusion media on the performance of the PEMFCs

Performance Enhancement of Proton Exchange Membrane Fuel Cell through Carbon Nanofibers Grown In Situ on Carbon Paper

Role of Fiber Length and Pore Former on the Porous Network of Carbon Paper Electrode and its Performance in PEMFC

Structure and properties of carbon fiber paper with gradient porous structure

Preparation and Characterization of Dopamine-Modified Carbon Fiber Paper Composites for Gas Diffusion Layers

Conduction mechanism analysis and modeling of different gas diffusion layers for PEMFC to improve their bulk conductivities via microstructure design

Effect of Clamping Compression on the Mechanical Performance of a Carbon Paper Gas Diffusion Layer in Polymer Electrolyte Membrane Fuel Cells

Effects of the Diffusion Layer Characteristics on the Performance of Polymer Electrolyte Fuel Cell Electrodes

Surface Treatment of Carbon Fiber and Conductive Properties of Paper

Study on preparation process and durability of gas diffusion layer of proton exchange membrane fuel cell