Abstract:In this study, recycled carbon fibers (rCFs) recovered from waste carbon composites were used to manufacture wet-laid nonwoven fabrics. The aim was to improve dispersibility by investigating the changes in the dispersibility of carbon fibers (CFs) based on the content of the dispersant carboxymethyl cellulose (CMC) and the binder polyvinyl alcohol (PVA), and the length and basis weight of the CFs. In addition, the chemical property changes and oxygen functional group mechanisms based on the content of the CMC dispersant and PVA binder were investigated. The nonwoven fabrics made with desized CFs exhibited significantly improved dispersibility. For nonwoven fabrics produced with a fixed binder PVA content of 10%, optimal dispersibility was achieved at a dispersant CMC concentration of 0.4%. When the dispersant CMC concentration was fixed at 0.4% and the binder PVA content at 10%, the best dispersibility was observed at a CF length of 3 mm, while the maximum tensile strength was achieved at a fiber length of 6 mm. Dispersibility remained almost consistent across different basis weights. As the dispersant CMC concentration increased from 0.2% to 0.6%, the oxygen functional groups, such as carbonyl group (C=O), lactone group (O=C-O), and natrium hydroxide (NaOH), also increased. However, hydroxyl group (C-O) decreased. Moreover, the contact angle decreased, while the surface free energy increased. On the other hand, when the dispersant CMC concentration was fixed at 0.4%, the optimal binder PVA content was found to be 3%. As the binder PVA content increased from 0% to 10%, the formation of hydrogen bonds between the CMC dispersant and the PVA binder led to an increase in C=O and O=C-O bonds, while C-O and NaOH decreased. As the amount of oxygen increased, the contact angle decreased and the surface free energy increased.

Effect of Different Chemical Treatments on the Dispersion Properties of Carbon Fiber and Paper Properties

Chemical Treatment of Carbon Fibers and the Development of Functional Paper

Research on Surface Treatment of Carbon Fiber and the Conductive Properties of Paper

Interfacial Modiﬁcation and Dispersion of Short Carbon Fiber and the Properties of Composite Papers As Gas Diffusion Layer for Proton Exchange Membrane Fuel Cell (PEMFC)

Study on modification of carbon fiber and performance of carbon paper as gas diffusion layer

Effect of Fixing Agent Dosage on the Mechanism of Colloidal Substances Retention Onto Pulp

Preparation of Gas Diffusion Carbon Paper and Its Uniformity Analysis

The Effects of NaOH-Urea Aqueous Solution on the Strength and Softness Properties of Bamboo Ligno-cellulosic Fibers

Surface Treatment of Carbon Fiber and Conductive Properties of Paper

Comparison of the internal functionalization and surface modification methods of chemi-mechanical pulp handsheets using nanocellulose, chitosan, and DTPA

Single Carbon Fiber/Acid-Treated CNT-Epoxy Composites by Electro- Micromechanical Technique and Wettability Test for Dispersion and Self-Sensing

Effect of Different Surfactants on Performance of Electrospun Ultrafine Nanofiber

Effects of Plasma and Acid Treatment on the Dispersion of Carbon Nanotubes in Liquids

Influence of density and chemical additives on paper mechanical properties

Effect of Carboxymethyl Cellulose and Polyvinyl Alcohol on the Dispersibility and Chemical Functional Group of Nonwoven Fabrics Composed of Recycled Carbon Fibers

Study on the interactions between dissolved and colloidal substances under the treatment of fixing agents in papermaking

EFFECT OF FIXING AGENTS ON THE AMOUNT OF WET END CHEMICALS ADSORBED ONTO A BLEACHED CHEMITHERMOMECHANICAL PULP

Effect of Alkali Treatment on Morphological Structure and Mechanical Properties of PTT Fiber

Influence of Alkaline/Hydrogen Peroxide Treatment on the Properties of Different Natural Cellulosic Fibers

A recyclable dispersant based on carbomer utilizing controllable viscosity for high-efficiency dispersion of carbon fibers

Behavior of Polyamine Fixing Agents on Agglomeration of Dissolved and Colloidal Substances in Papermaking