Abstract:In this study, recycled carbon fibers (rCFs) recovered from waste carbon composites were used to manufacture wet-laid nonwoven fabrics. The aim was to improve dispersibility by investigating the changes in the dispersibility of carbon fibers (CFs) based on the content of the dispersant carboxymethyl cellulose (CMC) and the binder polyvinyl alcohol (PVA), and the length and basis weight of the CFs. In addition, the chemical property changes and oxygen functional group mechanisms based on the content of the CMC dispersant and PVA binder were investigated. The nonwoven fabrics made with desized CFs exhibited significantly improved dispersibility. For nonwoven fabrics produced with a fixed binder PVA content of 10%, optimal dispersibility was achieved at a dispersant CMC concentration of 0.4%. When the dispersant CMC concentration was fixed at 0.4% and the binder PVA content at 10%, the best dispersibility was observed at a CF length of 3 mm, while the maximum tensile strength was achieved at a fiber length of 6 mm. Dispersibility remained almost consistent across different basis weights. As the dispersant CMC concentration increased from 0.2% to 0.6%, the oxygen functional groups, such as carbonyl group (C=O), lactone group (O=C-O), and natrium hydroxide (NaOH), also increased. However, hydroxyl group (C-O) decreased. Moreover, the contact angle decreased, while the surface free energy increased. On the other hand, when the dispersant CMC concentration was fixed at 0.4%, the optimal binder PVA content was found to be 3%. As the binder PVA content increased from 0% to 10%, the formation of hydrogen bonds between the CMC dispersant and the PVA binder led to an increase in C=O and O=C-O bonds, while C-O and NaOH decreased. As the amount of oxygen increased, the contact angle decreased and the surface free energy increased.

A recyclable dispersant based on carbomer utilizing controllable viscosity for high-efficiency dispersion of carbon fibers

Effect of Different Chemical Treatments on the Dispersion Properties of Carbon Fiber and Paper Properties

Interfacial Modiﬁcation and Dispersion of Short Carbon Fiber and the Properties of Composite Papers As Gas Diffusion Layer for Proton Exchange Membrane Fuel Cell (PEMFC)

Research on Surface Treatment of Carbon Fiber and the Conductive Properties of Paper

Chemical Treatment of Carbon Fibers and the Development of Functional Paper

Electrostatic manipulation for saturated charging and orientating of recycled short-chopped carbon fibers based on dielectric polarization

High-quality Electrostatic Recycling of Waste Carbon Fiber Via Spark-Driven Shock Waves and Joule Heating

A Novel Approach on Recycling Short-Chopped Carbon Fibers by Electric Field Induced Manipulation

Effect of Carboxymethyl Cellulose and Polyvinyl Alcohol on the Dispersibility and Chemical Functional Group of Nonwoven Fabrics Composed of Recycled Carbon Fibers

Research on the dispersion of carbon fiber and recycled carbon fiber in cement-based materials: a review

Optimized Design of Material Preparation for Cotton Linters-Based Carbon Black Dispersion Stabilizers Based on Response Surface Methodology

Dispersant Selection for Nanomaterials: Insight into Dispersing Functionalized Carbon Nanotubes by Small Polar Aromatic Organic Molecules

Efficient and Sustainable Strategy for Recycling of Carbon Fiber-Reinforced Thermoset Composite Waste at Ambient Pressure

Recyclable separation and recovery of carbon fibers from CFRP composites: Optimization and mechanism

Effects of Chemical Structure on the Properties of Carboxylate‐type Copolymer Dispersant for Coal‐water Slurry

Surface Treatment of Carbon Fiber and Conductive Properties of Paper

Facile preparation, closed-loop recycling of multifunctional carbon fiber reinforced polymer composites

Surface modification and dispersity of chopped carbon fiber and its effects on mechanical properties of gypsum-based composite materials

Reprocessable and recyclable high-performance carbon fiber-reinforced composites enabled by catalyst-free covalent adaptable networks

Interface strengthening and high-value recycling of epoxy resin/carbon fiber fabric composites

Efficient preparation and characterization of carbon fiber paper using phenolic resin in-pulp addition method