Abstract:The effect on PEFC performance of a gas diffusion layer (GDL) with a hydrophilic layer (HL) between the microporous layer (MPL) and the carbon paper (CP) was investigated at high and low humidity at normal operating temperatures and at subfreezing temperatures. Scanning electron microscopic examination and micro-Raman spectroscopic examination were carried out on the three-layer structure (MPL, HL and CP). In addition, high magnification SEM images of the samples showed that the HL had smaller pores than the MPL of the HL-GDL. Thus, we consider that the capillary pressure in the pores of the HL was higher than that in the MPL of the HL-GDL, which suggests that the HL can absorb more water. The performances of cells using the GDL with or without a HL were compared. The cell using a GDL with a HL showed a higher performance than a cell with a conventional GDL in the high current density region at both high and low humidity. At high humidity, the HL can absorb generated water, improving water removal from the catalyst layer (CL) to the GDL, and inhibiting the stoppage of gas diffusion by condensed water in the CL. At low humidity, the HL enhanced the water retention in the MEA, inhibiting the decrease of proton conductivity of the electrolyte by dehydration. A cell using a GDL with a HL also showed superior performance during cold startup from -10°C, due to water removal by the HL, inhibiting the blockage of gas diffusion by condensed or frozen water in the CL. These results indicate that an HL placed between the MPL and the carbon paper of the GDL can improve the PEFC performance over a wide range of operating conditions, including high and low humidity at normal temperatures and cold startup from subfreezing temperatures.

Effects of fluorinated ethylene propylene contents in a novel gas diffusion layer on cell performance of a proton exchange membrane fuel cell

Study on micro-porous layer by coating on carbon fiber paper as gas diffusion layer

Hydrophobicity enhancement of gas diffusion layer induced by hydrothermal deposition process and the electrochemical performance of proton exchange membrane fuel cell

Experimental and Simulation Analysis of Liquid Capillary Fingering Process in the Gas Diffusion Layer

Effects of the carbon black properties in gas diffusion layer on the performance of proton exchange membrane fuel cells

Effects of Cathode Gas Diffusion Layer Configuration on the Performance of Open Cathode Air-Cooled Polymer Electrolyte Membrane Fuel Cell

Effect of the Gas Diffusion Layer Design on the Water Management and Cell Performance of a PEM Fuel Cell

Study on preparation process and durability of gas diffusion layer of proton exchange membrane fuel cell

Application of Ployvinylidene Fluoride-Hexafluoroprorylene in Gas Diffusion Layer of Proton Exchange Membrane Fuel Cell

Effects of Cathode GDL Gradient Porosity Distribution along the Flow Channel Direction on Gas-Liquid Transport and Performance of PEMFC

Improvement in physical properties of single-layer gas diffusion layers using graphene for proton exchange membrane fuel cells

A design of gas diffusion media for polymer electrolyte membrane fuel cell: Characterization and water management investigation

Optimization of gas diffusion layer thickness for proton exchange membrane fuel cells under steady-state and load-varying conditions

One-step to prepare high-performance gas diffusion layer (GDL) with three different functional layers for proton exchange membrane fuel cells (PEMFCs)

Performance Enhancement of Polymer Electrolyte Membrane Fuel Cells with a Hybrid Wettability Gas Diffusion Layer

An ultrathin substrate-free gas diffusion layer for proton exchange membrane fuel cell

A New Integrated GDL with Wavy Channel and Tunneled Rib for High Power Density PEMFC at Low Back Pressure and Wide Humidity

Effects of gas diffusion layer thickness on PEM fuel cells with composite foam-rib flow fields

The buffer microporous layer improved water management for proton exchange membrane fuel cell at varying humidification

The impact of anode gas diffusion layer structure on fuel cell performance

Investigation of the effect of a hydrophilic layer in the gas diffusion layer of a polymer electrolyte membrane fuel cell on the cell performance and cold start behaviour