Abstract:A numerical simulation by using a three-dimensional multiphase polymer electrolyte membrane (PEM) fuel cell model and the volume of fluid (VOF) method is performed to investigate a newly designed hybrid wettability gas diffusion layer (GDL) for performance enhancement of PEM fuel cells. The hybrid wettability GDL has interchangeable distributions of relatively low and high hydrophobic regions along the gas flow direction. The low hydrophobic regions are characterized by high porosity and low water removal performance, whereas the high hydrophobic regions have low porosity and strong water removal ability. Simulation results show that the water removal process, mass diffusion and output performance of fuel cells greatly depend on the wettability degree distribution in the hybrid wettability GDL. In comparison with conventional GDL designs, the hybrid wettability GDL with polytetrafluoroethylene (PTFE) content of 10 wt% and 20 wt% for low and high hydrophobic regions at 1.5 mm intervals exhibits advantages in the enhancement of water removal from the gas flow channel and the mass diffusion within porous electrodes. Therefore, it can improve the uniform distribution of oxygen, the liquid water saturation and the reaction rate and ultimately benefit the stable operation and output performance of PEM fuel cells. Result also shows that the limiting current density of the optimal hybrid wettability GDL increases by 4.45% compared with that of the conventional GDL with PTFE content of 20 wt%. Furthermore, the study reveals that hybrid wettability GDL designs exhibit a greater advantage at high RHs than at low RHs.

Application of Ployvinylidene Fluoride-Hexafluoroprorylene in Gas Diffusion Layer of Proton Exchange Membrane Fuel Cell

Study on micro-porous layer by coating on carbon fiber paper as gas diffusion layer

PVDF-based Polymer Blend Films for Fuel Cell Membranes

Effects of fluorinated ethylene propylene contents in a novel gas diffusion layer on cell performance of a proton exchange membrane fuel cell

An ultrathin substrate-free gas diffusion layer for proton exchange membrane fuel cell

Alpha-chitin nanocrystals prepared from shrimp shells and their specific surface area measurement.

Hydrophobicity enhancement of gas diffusion layer induced by hydrothermal deposition process and the electrochemical performance of proton exchange membrane fuel cell

Performance Enhancement of Polymer Electrolyte Membrane Fuel Cells with a Hybrid Wettability Gas Diffusion Layer

One-step to prepare high-performance gas diffusion layer (GDL) with three different functional layers for proton exchange membrane fuel cells (PEMFCs)

Study on preparation process and durability of gas diffusion layer of proton exchange membrane fuel cell

Thermal Diffusivity Coefficient of Glycerin Determined on an Acoustically Levitated Drop

Investigation on performance of full-scale proton exchange membrane fuel cell: Porous foam flow field with integrated bipolar plate/gas diffusion layer

Two-Stage Microporous Layers with Gradient Pore Size Structure for Improving the Performance of Proton Exchange Membrane Fuel Cells

Effect of polytetrafluoroethylene shedding on water and heat transport in the gas diffusion layer of proton exchange membrane fuel cells

Effect of the Gas Diffusion Layer Design on the Water Management and Cell Performance of a PEM Fuel Cell

Porous Media Flow Field for Polymer Electrolyte Membrane Fuel Cell: Depression of Gas Diffusion Layer Intrusion, Deformation, and Delamination

Manufacturing protocol and post processing of ultra-thin gas diffusion layer using advanced scanning techniques

A design of gas diffusion media for polymer electrolyte membrane fuel cell: Characterization and water management investigation

Porous Material (Titanium Gas Diffusion Layer) in Proton Exchange Membrane Fuel Cell/Electrolyzer: Fabrication Methods & GeoDict: A Critical Review

A review on gas diffusion layer in proton exchange membrane fuel cell: Materials and manufacturing

Enhancing oxygen distribution in proton exchange membrane fuel cells based on modified gas diffusion layer designs: a comparative study