Abstract:Platinum group metal (PGM) catalysts are the major electrocatalysts for oxygen reduction reaction (ORR) in the polymer electrolyte membrane fuel cells (PEMFCs). However, the cost of PGM catalysts is very high. Particular, the cost becomes unaffordable if the PEMFC is in massive application. In order to remove this cost obstacle of fuel cell commercialization, PGM-free catalysts have been considered as the replacement of PGM catalysts for ORR because of the low cost and the reasonable performance. Fe-C-N complex is the one of the most active centers in PGM-Free catalyst groups. This type of catalyst shows very promising activity in rotation disk electrode (RDE) testing. The half wave potential could reach 0.91 V versus standard hydrogen electrode (SHE). However, in a membrane electrode assembly (MEA), the performance of PGM-Free catalysts is not good enough to replace the PGM catalysts. Since the PGM-free catalysts are so different from the PGM catalysts in terms of catalytic activity, stability, surface conditions, particle size etc, the fabrication of PGM-Free catalyst MEA cannot simply copy the method of making PGM MEA. In addition, the thicknesses of catalyst layers of PFM-free are significantly thicker than that of PGM, for example, 10 times. We proposed a novel method of fabricating PGM-Free catalyst MEA, so that the intrinsic catalyst activity from RDE can be translated into MEA performance. The method is based on the catalyst coated membrane (CCM) method using optimized ionomer to carbon (I/C) ratio and solvent mixture of catalyst ink. Using this method, the PGM-free catalyst MEA achieved the current density 44.9 mA cm-2 at 0.9 ViR-free in H2/O2 and 150 mA cm-2 at 0.8 V in H2/air, which surpassed the performance targets of US Department of Energy (DOE) for PGM-Free catalyst MEA. The property (solvent composition, dispersion of catalyst and ionomer in an ink), structure (pore structure) and the MEA performance have been characterized using ultra-small angle x-ray scattering (USAXS), cyro-TEM, mercury intrusion porosimetry (MIP), SEM/EDAX, RDE and MEA testing. A property-structure-performance relationship has been established.

Effects Of The Nanoimprint Pattern On The Performance Of A Mems-Based Micro Direct Methanol Fuel Cell

Development of MEMS-based direct methanol fuel cell with high power density using nanoimprint technology

Application of Nanoimprint Technology in MEMS-Based Micro Direct-Methanol Fuel Cell ( <formula formulatype="inline"><tex>$\mu$</tex></formula>-DMFC)

Nanoimprint of Proton Exchange Membrane for MEMS-based Fuel Cell Application

Detailed Optimization of Multiwall Carbon Nanotubes Doped Microporous Layer in Polymer Electrolyte Membrane Fuel Cells for Enhanced Performance

Controlling the Microscopic Morphology and Permeability of Catalyst Layers in Proton Exchange Membrane Fuel Cells by Adjusting Catalyst Ink Agglomerates

Application of Mems Technology to Micro Direct Methanol Fuel Cell

Direct Methanol Fuel Cells: the Effect of Electrode Fabrication Procedure on Meas Structural Properties and Cell Performance

(Digital Presentation) Effects of Catalyst Dimension Parameters on Local Oxygen Transport in Cathode Catalyst Layer of Proton Exchange Membrane Fuel Cell

Effect of the Microporous Layer Structure and Hydrophobicity on the Performance of Direct Methanol Fuel Cells

Improving Cell Performance and Alleviating Performance Degradation by Constructing a Novel Structure of Membrane Electrode Assembly (MEA) of DMFCs

Improvement of Direct Methanol Fuel Cell Performance by Modifying Catalyst Coated Membrane Structure

Effect of cathode gas flow patterns on performance of micro direct methanol fuel cell

Microfluidic Direct Methanol Fuel Cell by Electrophoretic Deposition of Platinum/Carbon Nanotubes on Electrode Surface

High Efficient Μ-Pemfcs by Integrating Micro/nano Scaled Performance Improving Components

A Monolithic Integrated Micro Direct Methanol Fuel Cell Based on Sulfo Functionalized Porous Silicon

Performance Enhancement of Polymer Electrolyte Membrane with Nano-Calcium Carbonate Prepared by Mechanochemical for Direct Methanol Fuel Cell Applications

Effects of anode flow field design on the performance of micro direct methanol fuel cell

High-Performance Polymer Fiber Membrane Based Direct Methanol Fuel Cell System with Non-Platinum Catalysts

Micro Direct Methanol Fuel Cell Based on Reduced Graphene Oxide Composite Electrode

Effects of Ink Formulation on the Structure and Performance of PGM-Free Catalyst Layer in PEMFCs