Abstract:The effects of the design parameters of the anode diffusion layer (DL), including the PTFE loading in the backing layer (BL), and the carbon and PTFE loading in the microporous layer (MPL), on water transport through the membrane and the performance of a liquid-feed direct methanol fuel cell (DMFC) are experimentally investigated. The results indicate that increasing the PTFE loading in the BL and introducing a MPL could decrease water crossover through the membrane without sacrificing cell performance when the feed methanol concentration is increased. It is also found that changing the PTFE loading in the MPL has little effect on water crossover, whereas increasing the carbon loading in the MPL could noticeably decrease the water-crossover flux. Nevertheless, the ability of the MPL to reduce water crossover is limited by the presence of a number of mud cracks. To reduce further the water-crossover flux, a crack-free MPL made of multi-walled carbon nanotubes (MWCNTs) and PTFE is proposed. Tests indicate that the DMFC with the nanotube MPL results in a much lower water-crossover flux than a conventional carbon-powder MPL. More importantly, the use of the nanotube MPL allows the DMFC to be operated with a higher methanol concentration, and thereby increases the fuel cell system energy density.

Effect of flow characteristics and temperature on performance and efficiency of a direct methanol fuel cell stack

Power characteristics and fluid transfer in 40 W direct methanol fuel cell stack

Effect of cathode gas flow patterns on performance of micro direct methanol fuel cell

Operational and Structural Aspects of a Vapor-Feed Semi-Passive Direct Methanol Fuel Cell Supplied with Concentrated Methanol

Heat and mass transfer characteristics in ducted air-breathing direct methanol fuel cells

Experimental investigation of the dynamic performance of a microdirect methanol fuel cell stack for practical applications

In-Situ Estimation Of Faradaic Efficiency For A Direct Methanol Fuel Cell Stack By A Carbon Dioxide Saturated Solution Method

Experimental Study of DMFC Based on Operating Parameters

Influence of operation conditions on the performance of single direct methanol fuel cell

Characteristics of Heat and Mass Transport in a Passive Direct Methanol Fuel Cell Operated with Concentrated Methanol

The Effect of Methanol Concentration on the Performance of A Passive Dmfc

Effect of Methanol Concentration on Performance of Passive DMFC

Numerical simulation on mass transport in a passive vapor-fed direct methanol fuel cell operating with neat methanol

Design and Performance Analysis of an Air-Breathing Micro Direct Methanol Fuel Cell

Performance analysis and multi-optimization of direct methanol fuel cell based on a novel numerical model considering mass transfer

Development of a 4-cell air-breathing micro direct methanol fuel cell stack

Influence of liquid electrolyte and liquid flowing electrolyte on the performance of an air breathing direct methanol fuel cell (ABDMFC)

Effect of the Microporous Layer Structure and Hydrophobicity on the Performance of Direct Methanol Fuel Cells

Effect of Design and Operating Parameters on Dynamic Response of A Micro Direct Methanol Fuel Cell

Investigation of a Small-Volume Direct Methanol Fuel Cell Stack for Portable Applications

Effects of Anode Microporous Layers Made of Carbon Powder and Nanotubes on Water Transport in Direct Methanol Fuel Cells