Abstract:Glass forming ability (GFA) is critically important for large-scale applications of bulk metallic glasses with maximized functionalities at low costs in materials and processing. Traditionally, excellent glass formers usually have compositions in eutectic regions where liquid phases have high stability and low liquid temperatures while GFA of off-eutectic alloys is largely limited by primary crystallization. In this study we reported that the GFA of Ni-based off-eutectic alloys can be dramatically improved by manipulating the primary crystallization reaction through minor alloying. As a result, a novel Ni60Pd20P14Si2B4 metallic glass with excellent GFA is developed by substituting P in Ni60Pd20P20 using 2 at.% Si and 4 at.% B. The minor alloying leads to the transition of the primary crystallization from a tetragonal (Ni, Pd)3P phase to a chemically modulated complex monoclinic phase. The enhanced GFA results in the largest achievable processing diameter (25 mm) of Ni-based bulk metallic glasses, which is more than four times larger than that of Ni60Pd20P20. The complex crystal structure of the primary crystalline phase with chemical modulation and a large unit cell leads to slow crystal growth, and hence the improved stability of supercooled liquid for better GFA.

The Effect of Purification on the Glass-Forming Ability of a Pd-Cu-Si Alloy

Preparation and Thermal Stability of Pd_(77.5)Cu_6Si_(16.5) Bulk Metallic Glass

Preparation of a Pd-Cu-Si Bulk Metallic Glass with a Diameter Up to 11 Mm

Effects Of The Cooling Rate On The Plasticity Of Pd40.5ni40.5p19 Bulk Metallic Glasses

Effects of the Cooling Rate on the Plasticity of Pd 40.5 Ni 40.5 P 19 Bulk Metallic Glasses

Preparation and Thermal Stability of Pd40.5Ni40.5SixP19−x Bulk Metallic Glasses

Glass Formation in the Pd–Si-based Alloys

Glass-forming ability and thermoplastic formability of a Pd 40 Ni 40 Si 4 P 16 glassy alloy

Glass Forming Ability and In-Situ Composite Formation in Pd-based Bulk Metallic Glasses

Pd-Si Binary Bulk Metallic Glass Prepared at Low Cooling Rate

The Effect of Ni Substitution on the Glass-Forming Ability and Mechanical Properties of Mg–Cu–Gd Metallic Glass Alloys

Improving Glass Forming Ability of Off-Eutectic Metallic Glass Formers by Manipulating Primary Crystallization Reactions

Effects of Al on Glass-Forming Ability and Thermal Stability of Cu-Based Metallic Glass

Cu-alloying Effect on Crystallization Kinetics of Ti41Zr25Be28Fe6 Bulk Metallic Glass

Influence of Flux Treatment on the Glass Forming Ability of Pd-Si Binary Alloys

Effect of Sn on Glass Formation Ability and Crystallization Behaviors of Cu-Based Bulk Metallic Glass Alloy

Formation and Mechanical Properties of Bulk Glassy Ni57-Xti23zr15si5pdx Alloys

Evaluation of Glass Formation and Critical Casting Diameter in Al-Based Metallic Glasses

Effects of Ga,In additions of the Glass Forming Ability of Fe40Ni40P14B6 Eutectic Alloy

Investigation of A Ductile and Corrosion-Resistant Pd79au1.5ag3si16.5 Bulk Metallic Glass

Pd-Si binary bulk metallic glass