Abstract:Glass forming ability (GFA) is critically important for large-scale applications of bulk metallic glasses with maximized functionalities at low costs in materials and processing. Traditionally, excellent glass formers usually have compositions in eutectic regions where liquid phases have high stability and low liquid temperatures while GFA of off-eutectic alloys is largely limited by primary crystallization. In this study we reported that the GFA of Ni-based off-eutectic alloys can be dramatically improved by manipulating the primary crystallization reaction through minor alloying. As a result, a novel Ni60Pd20P14Si2B4 metallic glass with excellent GFA is developed by substituting P in Ni60Pd20P20 using 2 at.% Si and 4 at.% B. The minor alloying leads to the transition of the primary crystallization from a tetragonal (Ni, Pd)3P phase to a chemically modulated complex monoclinic phase. The enhanced GFA results in the largest achievable processing diameter (25 mm) of Ni-based bulk metallic glasses, which is more than four times larger than that of Ni60Pd20P20. The complex crystal structure of the primary crystalline phase with chemical modulation and a large unit cell leads to slow crystal growth, and hence the improved stability of supercooled liquid for better GFA.

Preparation of a Pd-Cu-Si Bulk Metallic Glass with a Diameter Up to 11 Mm

Preparation and Thermal Stability of Pd_(77.5)Cu_6Si_(16.5) Bulk Metallic Glass

The Effect of Purification on the Glass-Forming Ability of a Pd-Cu-Si Alloy

Formation and Mechanical Properties of Pd-Si Binary Bulk Metallic Glasses

Pd-Si Binary Bulk Metallic Glass Prepared at Low Cooling Rate

Preparation and Thermal Stability of Pd40.5Ni40.5SixP19−x Bulk Metallic Glasses

Formation of Pd-Ni Based Bulk Metallic Glasses

Pd-Si binary bulk metallic glass

Investigation of A Ductile and Corrosion-Resistant Pd79au1.5ag3si16.5 Bulk Metallic Glass

CENTIMETER-SIZED Ti-BASED QUATERNARY BULK METALLIC GLASS PREPARED BY WATER QUENCHING

Centimeter-sized Ti-based Bulk Metallic Glass with High Specific Strength

Superductile Bulk Metallic Glass

Structural heterogeneity in a binary Pd–Si metallic glass

Mechanical Properties of a Cu 55 Zr 30 Ti 10 Pd 5 Bulk Amorphous Alloy

A Ti–Zr–Be–Fe–Cu Bulk Metallic Glass with Superior Glass-Forming Ability and High Specific Strength

Glass Formation in the Pd–Si-based Alloys

Preparation of Bulk Amorphous Fe–Ni–P–B–Ga Alloys from Industrial Raw Materials

Formation and mechanical properties of Cu_(58)Zr_(20)Ti_(20)Mo_2 bulk metallic glass

Glass-forming ability and thermoplastic formability of a Pd 40 Ni 40 Si 4 P 16 glassy alloy

Improving Glass Forming Ability of Off-Eutectic Metallic Glass Formers by Manipulating Primary Crystallization Reactions

Precipitation of Sulfide Particle in Situ Formed in Fe-Based Bulk Metallic Glass