Abstract:In order to achieve well-performing chemical strengthening behavior, the composition of 86.12(xSiO(2)-yAl(2)O(3)-zP(2)O(5))- 9.95Na(2)O- 1.27ZnO- 2.66Li(2)O (x = 55-85wt%, y = 10-40wt% and z = 5-35wt%) were prepared by conventional melt-quenching technique. The glass forming region was obtained. Two compositional series of 65SiO(2)-yAl(2)O(3)-zP(2)O(5) (15 <= y <= 30, 5 <= z <= 30, 5 <= z <= 20) (Series I) and xSiO(2)-20%Al2O3-zP(2)O(5) (60 <= x <= 75, 5 <= z <= 20) (Series II) have been investigated. The relationship between glass structure and composition was investigated. The results show that the transparent and homogeneous glass is formed when the glass former P2O5 is lower than or equal to 15 wt% roughly. The P2O5 substitution for Al2O3 accelerates the depolymerization of aluminosilicate network. Phosphorus acts as network formers in the form of P-1 and P-2 units. In the case of the P2O5 substitution for SiO2, the roles of phosphorus in the glass network include P-0, P-1, P-2 and P-3 units. Furthermore, the Series I and Series II glass samples were chemical strengthened. The ion-exchange depth and the elastic modulus before and after chemical strengthening were studied. The results reveal that the ion exchange depth and elasticity modulus after chemical strengthening is maximum at 64 mu m and 80.5 GPa for x/z = 5.4 sample, respectively. The addition of phosphorus accelerates ion exchange, which is mainly attributed to the formation of ion channels. The number of P-n and the coordination number of phosphorus are the main factors effecting the ion channels.

Glass-forming ability and thermoplastic formability of a Pd 40 Ni 40 Si 4 P 16 glassy alloy

Glass-forming ability correlated with the liquid-liquid transition in Pd42.5Ni42.5P15 alloy

Formation and Mechanical Properties of Bulk Glassy Ni57-Xti23zr15si5pdx Alloys

Preparation and Thermal Stability of Pd40.5Ni40.5SixP19−x Bulk Metallic Glasses

Glass Forming Ability and In-Situ Composite Formation in Pd-based Bulk Metallic Glasses

Formation of Pd-Ni Based Bulk Metallic Glasses

Glass Formation in the Pd–Si-based Alloys

Preparation and Thermal Stability of Pd_(77.5)Cu_6Si_(16.5) Bulk Metallic Glass

Improving Glass Forming Ability of Off-Eutectic Metallic Glass Formers by Manipulating Primary Crystallization Reactions

Effects Of The Cooling Rate On The Plasticity Of Pd40.5ni40.5p19 Bulk Metallic Glasses

Effects of the Cooling Rate on the Plasticity of Pd 40.5 Ni 40.5 P 19 Bulk Metallic Glasses

The Effect of Purification on the Glass-Forming Ability of a Pd-Cu-Si Alloy

Glass-forming ability and thermoplastic formability of ferromagnetic (Fe, Co, Ni)75P10C10B5 metallic glasses

The Role of Phosphate in the Glass Forming Region, Structure and Mechanical Properties for the SiO2-Al2O3-P2O5 System Contains High-Aluminum

Influence of minor Si addition on the glass-forming ability and mechanical properties of Pd40Ni40P20 alloy

Formation and Mechanical Properties of Pd-Si Binary Bulk Metallic Glasses

Thermal stability and fragility of Pd–Si binary bulk metallic glasses

Glass-Forming Ability of Al-Co Alloy under Rapid Annealing

Investigation of A Ductile and Corrosion-Resistant Pd79au1.5ag3si16.5 Bulk Metallic Glass

Superductile Bulk Metallic Glass

Microstructural Features of Phase Transformation in a Binary Pd–Si Metallic Glass