Abstract:To study the temperature distribution and evolution during bulk metallic glasses fabrication, finite element method was taken to simulate the cooling process in glassy alloys fabricated by water quenching and copper mold casting. The temperature distribution and evolution in different-sized samples in the two methods were successfully reproduced. The result showed that the temperature distribution in the alloy was strongly affected by fabricating method. Two relations were then proposed to estimate the cooling rate in different-sized samples prepared by these two methods. By comparing the reported data of critical size and critical cooling rate, we showed that the reported critical size and critical cooling rate of metallic glasses didn’t follow a heat transfer relation. Those critical-sized glassy alloys actually experienced cooling rates much larger than the critical cooling rates estimated by the classical nucleation theory or experiments on milligram-scaled samples. It results from the increasing degree of heterogeneity with sample size, and therefore a larger sample requires a faster cooling rate to avoid crystallization. This work clearly shows the temperature field evolution in bulk metallic glasses fabrication and reveals that the critical cooling rate of metallic glasses might be size-dependent.

Effects Of The Cooling Rate On The Plasticity Of Pd40.5ni40.5p19 Bulk Metallic Glasses

Effects of the Cooling Rate on the Plasticity of Pd 40.5 Ni 40.5 P 19 Bulk Metallic Glasses

Influence of quenching rate on the crystallization behaviors of Mg63Ni22Pr15 metallic glass

Atomic-scale Heterogeneity in Large-Plasticity Cu-doped Metallic Glasses

The Influence of Cooling Rate on the Hardness of Pd–Si Binary Glassy Alloys

The Effect of Purification on the Glass-Forming Ability of a Pd-Cu-Si Alloy

Effects of cooling rate and sub-Tg annealing on Ni80P20 metallic glass: A molecular dynamic (MD) study

Preparation and Thermal Stability of Pd_(77.5)Cu_6Si_(16.5) Bulk Metallic Glass

Glass-forming ability and thermoplastic formability of a Pd 40 Ni 40 Si 4 P 16 glassy alloy

Preparation and Thermal Stability of Pd 40.5 Ni 40.5 Si X P 19− X Bulk Metallic Glasses

Atomic structure transition for various solidification paths of Pd40Ni40P20 at different cooling rates

A Study of Cooling Process in Bulk Metallic Glasses Fabrication

Structural Flexibility of a Pd40Ni40Si5P15 Bulk Metallic Glass

Solidification Microstructure Evolution and Grain Refinement Mechanism under High Undercooling of Undercooled Ni90Cu10 Alloys

Structural Stability of Pd40Cu30Ni10P20 Metallic Glass in Supercooled Liquid Region

Glass-forming ability correlated with the liquid-liquid transition in Pd42.5Ni42.5P15 alloy

Pd40Ni40Si5P15 Bulk Metallic Glass Properties Variation As a Function of Sample Thickness

Pd-Si Binary Bulk Metallic Glass Prepared at Low Cooling Rate

Impact of micro-alloying on the plasticity of Pd-based Bulk Metallic Glasses

Cu-alloying Effect on Crystallization Kinetics of Ti41Zr25Be28Fe6 Bulk Metallic Glass

Homogeneous plastic deformation in a Cu-based bulk amorphous alloy