Abstract:Glass forming ability (GFA) is critically important for large-scale applications of bulk metallic glasses with maximized functionalities at low costs in materials and processing. Traditionally, excellent glass formers usually have compositions in eutectic regions where liquid phases have high stability and low liquid temperatures while GFA of off-eutectic alloys is largely limited by primary crystallization. In this study we reported that the GFA of Ni-based off-eutectic alloys can be dramatically improved by manipulating the primary crystallization reaction through minor alloying. As a result, a novel Ni60Pd20P14Si2B4 metallic glass with excellent GFA is developed by substituting P in Ni60Pd20P20 using 2 at.% Si and 4 at.% B. The minor alloying leads to the transition of the primary crystallization from a tetragonal (Ni, Pd)3P phase to a chemically modulated complex monoclinic phase. The enhanced GFA results in the largest achievable processing diameter (25 mm) of Ni-based bulk metallic glasses, which is more than four times larger than that of Ni60Pd20P20. The complex crystal structure of the primary crystalline phase with chemical modulation and a large unit cell leads to slow crystal growth, and hence the improved stability of supercooled liquid for better GFA.

Pd-Si Binary Bulk Metallic Glass Prepared at Low Cooling Rate

Pd-Si binary bulk metallic glass

Preparation and Thermal Stability of Pd_(77.5)Cu_6Si_(16.5) Bulk Metallic Glass

Formation and Mechanical Properties of Pd-Si Binary Bulk Metallic Glasses

Preparation and Thermal Stability of Pd40.5Ni40.5SixP19−x Bulk Metallic Glasses

Structural heterogeneity in a binary Pd–Si metallic glass

Formation of Pd-Ni Based Bulk Metallic Glasses

Preparation of a Pd-Cu-Si Bulk Metallic Glass with a Diameter Up to 11 Mm

Superductile Bulk Metallic Glass

The Influence of Cooling Rate on the Hardness of Pd–Si Binary Glassy Alloys

Thermal stability and fragility of Pd–Si binary bulk metallic glasses

The Effect of Purification on the Glass-Forming Ability of a Pd-Cu-Si Alloy

Glass-forming ability and thermoplastic formability of a Pd 40 Ni 40 Si 4 P 16 glassy alloy

Effects Of The Cooling Rate On The Plasticity Of Pd40.5ni40.5p19 Bulk Metallic Glasses

Glass Formation in the Pd–Si-based Alloys

Investigation of A Ductile and Corrosion-Resistant Pd79au1.5ag3si16.5 Bulk Metallic Glass

Effects of the Cooling Rate on the Plasticity of Pd 40.5 Ni 40.5 P 19 Bulk Metallic Glasses

Influence of Flux Treatment on the Glass Forming Ability of Pd-Si Binary Alloys

Improving Glass Forming Ability of Off-Eutectic Metallic Glass Formers by Manipulating Primary Crystallization Reactions

Microstructural Features of Phase Transformation in a Binary Pd–Si Metallic Glass

Solidification Microstructure in a Supercooled Binary Alloy